Electric
The correct way to connect a test voltmeter is a circuit is:
What is in parallel with a unit?
An orthographic projectioin.
What has one view, two view, and three view drawings as most common?
The effects of annealing steal
What are decrease internal stress and soften metal?
Unless otherwise specified, bolts are to be installed this way.
What is upward, or in a forward direction?
Magnetic particle inspection is used to detect these.
What are flaws on or near the surface?
.002 KV equals;
What is 2 volts?
The class of working drawing that is a depiction of a single part.
What is a detail drawing?
Heat treating process of metal that produces a hard, wear resistant surface over a strong, tough core.
What is case hardening?
Aircraft bolts marked with a cross or astyerisk.
What are standard steel bolts?
Two types of indicating mediums available for magnetic particle inspection.
What are wet and dry process materials?
Unit used to express electrical power.
What is Watt?
The purpose of a schematic drawing.
What is to show a functional location of components within a system?
Normalizing is a process of heat treating these metals.
What are iron base metals only?
Bolt grip lengths should include.
What are the thickness of the material to be fastened together?
A part being prepared for dye penetrant inspection should be cleaned with this.
What is a volatile petroleum based solvent?
Material through which magnetic lines of force pass the most readily.
What is Iron?
A hydraulic system schematic drawing will indicate this.
What is the direction of fluid flow through the system?
Alclad consists of this.
What is pure aluminum surface layers on an aluminum alloy core?
A bolt with a single raised dash on its head.
What is AN corrosion resistant steel bolt?
On a filet weld, the penetration of the weld should be this percentage of the base metal.
What is 25% to 50%?
The voltage drop in a conductor of known resistance id dependent on this.
What is Amperage?
The drawings often used in illustrated parts manuals.
What are exploded view drawings?
An aluminum code number 1100.
What designates 99% pure aluminum?
A bolt with an X inside of a triangle on its head.
What is a NAS close tolerance bolt?
This type of NDT requires little to no preparation, is used to detect surface or near surface defects in most metals, and may also be sued to separate metals or alloys and their heat treat conditions.
What is eddy current inspection?