Glass
External or Internal
What is Decontaminate/Final Wash
Standard Cut
What is Clean Pinchweld with glass cleaner/ Trim to 1-2 mm/ Install glass
2- Minutes
What is 2-minute flash-off time above 20°F
Properties
What is Great decking properties
FVMSS 219
What is windshield intrusion test measures the windshield’s ability to keep a 15 lb. object traveling at 30 mph from entering the vehicle cabin. The glass and adhesive bond protect occupants from the intrusion of external objects. When struck, the windshield can be displaced no more than 1/4 inch to pass.
Clear Glass
What is Decontaminate/Final Wash/ST/ST
Scratches or Bare Metal <1/2
What is Clean Pinchweld with glass cleaner/ Trim to 1-2 mm/ ST
Unopen
What is 9-month shelf life
External/Internal
What is Primerless to glass with frit (external/internal)
FMVSS 212
What is measures windshield retention in a barrier crash. Automobiles equipped with passive restraints must retain 50% of the windshield perimeter on each side of the vehicle. Vehicles not equipped with passive restraints must have no less than 75% glass retention. Some vehicle manufacturers require 100% windshield retention in this severe crash test.
OEM Pre- Primed Part
What is Decontaminate/Final Wash/ST
Bare Metal <24"/ CAR/ Newly Painted
What is Scuff specific impacted areas/Clean Pinchweld with glass cleaner/ Trim to 1-2 mm/ ST/ST
Blackout
What is Shake for 5 seconds (this improves blackout coverage)
No Limit
Air: 0° - No Upper Limit
MDAT
What is Minimum Drive-Away Time of thirty (30) minutes in all temperature and relative humidity climates.
Gorilla Glass
What is Decontaminate/Final Wash/ST
Gasket set part/ Gasket
What is Clean Gasket with glass cleaner/ST
Atmospheric
Cure Mechanism: Moisture Curing (atmospheric)
Atmospheric
What is Cure Mechanism: moisture-curing ( moisture).
Holes in Metal
Perforation: varies from microscopic holes to loss of metal.
Paas
What is Decontaminate/Apply Glass Cleaner/ Wet scrub/Final Wash/ST
Corrosion <24"
What is Bright shiny metal/Clean Pinchweld with glass cleaner/ Trim to 1-2 mm/ Metal Prep Stick/Wipe with water/ST/ST
Acrylics and Polycarbonates
What is Adhesion Promotor for Acrylics and Polycarbonates
Working time
The maximum period of time that may elapse between the start of the application of the urethane and assembly of the bond (setting the part).
VPE for Rust
What is Hood protection, Dash protection, Paint Protection (tape), and Headliner/A-Pillar Protection