Surface Treatment flash times 0-20 degrees & 20+ degrees.
What is 6 & 2 minuets?
APEX to fritted glass parts.
What is primerless?
FMVSS 208
What is occupant crash protection? (30-mph barrier crash & no separation of lead bearing safety assemblies)
Clear Glass.
What is decontaminate, final wash, 2 coats of surface treatment?
How tall the existing urethane should be after trimming.
What is 1-2mm?
MDAT is _____ minutes and starts when this is done.
What is 30 and when I finish running urethane?
Moisture
What is the curing mechanism for APEX?
FMVSS 212
What is windshield retention? (50% of the windshield perimeter on each side or 75% with no passive restraints)
Encapsulated/metal framed/PAAS/carbon fiber part.
What is decontaminate, apply glass cleaner, wet scrub with scotch brite, final wash, 1 coat of Surface Treatment?
Corrosion I can't treat.
What is perforation or more than 24" squared?
Working time is ____ minutes and begins when this is done.
What is 12 and when I start running urethane?
Optimal temperature for urethane application.
What is 65-70 degrees?
FMVSS 216
What is roof crush performance test? (1.5 times vehicle weight & 5 inches or less of deflection)
Corrosion <24" squared.
What is achieve bright shiny metal, clean with glass cleaner, trim urethane, metal cleaner prep stick, wipe with water, 2 coats of Surface Treatment?
The bare metal size difference between one or two coats of Surface Treatment.
What is 1/2" squared?
APEX and Surface Treatment shelf life.
What is 9 months?
APEX is a _____ & ______ urethane adhesive.
What is high modulus/non-conductive.
FMVSS 219
what is intrusion test? (15 lb. object @ 30-mph & displaced less than 1/4 in.)
Polycarbonate
What is decontaminate, scuff with 100 grit sandpaper, final wash, 1 coat of surface treatment?
The active time of Surface Treatment.
What is 72 hours?
Surface Treatment open life.
What is 14 days?
An advantage of APEX urethane.
What is great decking properties?
ANSI/AGRSS 004-2018.
What is recording adhesive lot numbers?
Gasket set body.
What is scuff pinch weld, glass cleaner/scrub pinch weld, 1 coat of Surface Treatment?
The best bonding surface.
What is fresh cut, uncontaminated urethane?