Hazard Recognition Plus
Hazard Communication
Electrical Awareness
LOTO / ECP
Miscellaneous Safety I
Miscellaneous Safety II
100
The three methods to manage energy sources.
What is "Eliminate - Control - Protect"
100
Two general types of chemical hazards
What are Physical and Health Hazard
100
This item is used in conjunction with electrical tools to protect people from electrical shock.
What is a Ground Fault Circuit Interrupter
100
This person the first verifier of the applied LOTO / Energy Control Procedure
Who is the Primary Authorized Person / Lock box Owner
100
The contractor must be escorted while onsite when this type of contractor site specific safety orientation is completed.
What is Tier I Training
100
This emergency checklist found in the emergency action plan has a color code of "Red"
What is Fire
200
Per HRP - The actual uncontrolled release or unwanted contact with an energy source.
What is an Incident
200
This type of hazard causes Acute and or Chronic effects
What is Health Hazard.
200
This is what harms or kills a person during an electrical shock.
What is Amperage
200
This is used between two flanges to prevent flow of material and sometimes left in place after lockout tagout removal.
What is a Pancake
200
The phrase "Everyone Do It the Right Every time"
What is Operational Discipline
200
Regrettably, in 2018 Arboris safety record had 2 of these.
What is Recordable Injuries.
300
Per HRP - The potential for uncontrolled release or unwanted contact with an energy source.
What is a Hazard
300
Globally Harmonized System of Classification and Labeling of Chemicals (GHS), and OSHA, requires that containers be this.
What is labelled.
300
Electrically unqualified worker can switch on and off this size / magnitude electrical breaker.
What is 480 Volts or less.
300
This item color is green and often left behind by a contractor on the lockbox.
What is a contractor lock
300
You get this from the EHS department and it then use it to purchase boots from Red Wing boot store.
What is a Voucher.
300
This type of fire extinguisher is required to within 50 feet of this type of potential fire and is able to extinguish fires that are fuel by flammable liquids.
What is "B" Type extinguisher
400
The acronym for remembering HRP Energies
What is My Challenge Remove Every Given Hazard Before Proceeding.
400
This two location are where Safety Data Sheets can be found.
What is MSDS Online and the Control SDS notebook
400
This is required for LOTO when a switch gear / breaker is locked out and tagged out.
What is Zero Voltage Check
400
This is the last step in Energy Control Procedure application and some may say it is the most important step.
What is the zero energy verification
400
These two types of safety is considered "Hard Hat Safety" ant the other type of safety is considered "Keep It In The Pipe Safety".
What is Occupational or Personnel Safety and Process Safety.
400
Dogs are often used to sniff these out, and this form found in the emergency action plan should be used if you get this threatening call.
What is the Bomb Threat Checklist form.
500
The five questions used in Hazard Recognition Plus Process.
1) What is The Job?
2) What energy is involved?
3) Where is the energy going?
4) How will we manage the energy for a safe job?
5) What are the specific stop the job triggers?
500
This provides an immediate warning about a chemical’s hazards.
What is Labels
500
Unqualified work should not ever open this, but an qualified electrician can open it.
What is an electrical panel with exposed electrical components.
500
These five items are required on the LOTO tag when applied
What is the Lock Box# - Device ID# - LOTO Position: - Initials - Date
500
This administrative tool is required to apply and remove a LOTO/ECP.
What is a Non-Routine Work Permit.
500
You are at risk of asphyxiation when you enter this room or building this system is active.
Building or Room with FM-200 System or Stat Gen X
600
These are the six senses used in energy identification.
What is Sight - Hearing - Touch - Smell - Taste - Gut Feeling
600
This person is required to attend chemical hazard training, and ask questions if you don't understand that training.
Know where to find SDSs, and understand what information they provide you.
Follow all workplace chemical safety rules.
Who is the Employee
600
These two administrative control are required if live electrical parts are not placed in an electrically safe condition and work to be performed would be consider energized electrical work
Non-Routine Work permit and Energized Electrical Work permit
600
What is wrong with this double block and bleed Lockout Tagout photo?
Each ball valve not secured properly
Missing tag for each valve that is isolated
Bleed Valve not locked open
600
HRP-
Incidents result from the interactions of three elements:
Equipment - People - Energy
600
When this heats up, it release air to start the deluge system.
What is the Pilot Head