PPE
Is provided at no charge and protects us from most injuries.
What is Personal Protective Equipment?
Pull, Aim, Squeeze, Sweep
What is P.A.S.S in regard to a fire extinguisher?
Every employee at ASC
Who is responsible for safety at ASC
The term for something dangerous found in the workplace called?
What is a Hazard?
Used for stopping trips and falls from cords and hoses.
What is a Guard dog?
Goggles, face shield, sleeves and hearing protection
The PPE required when drilling overhead, cutting plywood or grinding.
A safety exercise to rehearse getting everyone out of the building and accounted for in the event of an emergency.
Evacuation/Fire Drill
What should you do whenever you see an unsafe condition in the workplace?
Report it and/or correct it immediately if it's safe to do so.
Only Qualified and trained operators.
Forklifts and Cranes should only be operated by?
How often and far I look for hazards
What is 20/20/20
The minimum Required PPE every day
Safety glasses, Helmet, steel toed boots and hearing protection
EYES!!!
A safety warning you announce before welding, to allow others around you time to protect themselves.
The government agency responsible and enforcing regulations which keep employees safe on the job.
OSHA
This will ensure no worker can be injured by moving parts of a machine.
A machine safety guard.
The Yellow Cabinets.
Where to store paints and thinners when not being used?
Can be made of materials like cotton, nitrile, latex, leather and vinyl...
Safety Gloves
The Guard Shack
What is the current rally point in case of an emergency evacuation?
What does OSHA stand for?
Occupational Safety and Health Administration
Where can you find absorbent material for spills?
Spill Kits
Before each break and when I clean up at the end of the shift as a welder.
When I'm required to close the valve on my welding bottle.
Hearing protection is required
When noise levels are sustained over 80dB
All Injuries, Accident, Incident or Near misses
Thes occurrences must be reported to your Supervisor and Safety as soon as they happen.
Place feet shoulder-width apart, bend your knees, keep the load close to your power zone.
The proper way to lift and carry items.
How high can you go until you need Fall Protection?
4 feet = 48 inches
Used for when a machine is not working and the power needs to be secured.
What is Lock Out / Tag Out?