Día 1
The most commonly used landing gear arrangement is
Tricycle-Type Landing Gear
electric/hydraulic system found in many Cessna and Piper aircraft is also known as a
power pack system
are commonly used on aircraft landing gear as extra insurance that the landing gear will remain down and locked while the aircraft is on the ground
Ground Lock (safety pin)
ATA de Trenes de Aterrizaje
32
tipo de resistencia que es generada por el simple hecho de volar
Resistencia parasita
When more than two wheels are attached to a landing gear strut, the attaching mechanism is known
bogie
Va instalado en el Front Spar
Trunion Housing
Abajo asegurado nos dara en el flight deck una luz
verde
mandan señal dependiendo que tan cerca o lejos esten entre ellos
proximity switch (switch de proximidad)
Dimension X
relacion entre la parte cromada del strut y la presion interna del mismo
Mencione los 3 tipos de trenes de aterrizaje
tail wheel-type landing gear, tandem landing gear, and tricycle-type landing gear.
al terminar un towing que se quita primero: La barra o el steering pin?
La barra
Llevan clarencias con respecto al fuselaje para verifica el Flushness
Landing gear doors
En el 737 que sistema se utiliza solo para subir los trenes
A y B
Crea un Time delay para que el uplock y down lock mechanism abran antes del main actuator
Transfer Cylinder
the forces of impact on an aircraft during landing must be controlled by the landing gear. This is done in two ways:
the shock energy is altered and transferred throughout the airframe at a different rate and time than the single strong pulse of impact, and 2) the shock is absorbed by converting the energy into heat energy.
El strut tiene 2 camaras. Que contienen cada una
la inferior hidraulico y la superior nitrogeno
La PSEU recibe informacion de los proximity switch de acuierdo a una variacion en
El Voltaje
cual es el termino utilizado bara bajar y subir trenes al realizar pruebas
gear swing
Que hace una selector valve con respecto al fluido Hidraulico. (utlize la palabra correcta y no sinonimos)
redirecciona
The tricycle-type landing gear arrangement consists of many parts and assemblies. These include: (menciona al menos 4 del listado)
air/oil shock struts, gear alignment units, support units, retraction and safety devices, steering systems, wheel and brake assemblies, etc
Retractable landing gear consist of several components that enable it to function. Typically, these are: (mencione 4 al menos sin equivocarse)
torque links, trunnion and bracket arrangements, drag strut linkages, electrical and hydraulic gear retraction devices, as well as locking, sensing, and indicating components.
The following is a list of general inspection items to be performed while swinging the gear: (Mencione 4)
Check the landing gear for proper extension and retraction, Check all switches, lights, and warning devices for proper operation, Check the landing gear doors for clearance and freedom from binding, Check landing gear linkage for proper operation, adjustment, and general condition, Check the alternate/emergency extension or retraction systems for proper operation, Investigate any unusual sounds, such as those caused by rubbing, binding, chafing, or vibration
En el 737 al igual que otras aeronaves, si se pierde un sitemas tendremos otro de backup, esta caracteristica la llamamos
redundante (redudancy)
al subir los trenes en gatos, poner los lock pin e intentar subirlos trenes para medir desplazamiento de lo trenes, etamaos haciendo prueba de:
Free play