DRIVE TRAIN
ENGINE
TOOL ID
4 STROKE CYCLE
MISC SYSTEMS
100
LETS THE DRIVER CHANGE GEAR RATIOS TO BETTER ACCOMMODATE DRIVING CONDITIONS
What is MANUAL TRANSMISSION
100
A CYLINDER COMPONENT THAT TRANSFERS THE ENERGY OF COMBUSTION (BURNING OF AIR FUEL MIXTURE) TO THE CONNECTING ROD
What is PISTON
100
HAS A BOX END JAW ON ONE AD AND AN OPEN END JAW ON THE OTHER
What is COMBINATION WRENCH
100
SPARK PLUG SPARKS, AIR FUEL MIXTURE BURNS, HIGH PRESSURE FORCES PISTON DOWN WITH TREMENDOUS FORCE, CRANK SHAFT ROTATES UNDER POWER, BOTH VALVES CLOSED
What is POWER STROKE
100
USES ELECTRONIC AND ELECTRICAL DEVICES TO MONITOR AND CONTROL VARIOUS SYSTEMS IN THE VEHICLE
What is COMPUTER SYSTEM
200
TRANSFERS POWER FROM THE TRANSMISSION TO THE REAR AXLE ASSEMBLY
What is DRIVE SHAFT
200
CHANGES RECIPROCATING (UP AND DOWN) MOTION OF THE PISTON AND ROD INTO USEFUL ROTARY (SPINNING) MOTION
What is CRANKSHAFT
200
MOST COMMONLY USED AND VERSATILE SOCKET HANDLE. IT HAS A SMALL LEVER THAT CAN BE MOVED FOR EITHER LOOSENING OR TIGHTENING BOLTS.
What is RATCHET
200
INTAKE VALVE OPENS, EXHAUST VALVE CLOSED. PISTON SLIDES DOWN, FORMING VACUUM IN CYLINDER, ATMOSPHERIC PRESSURE PUSHES AIR AND FUEL INTO COMBUSTION CHAMBER.
What is INTAKE STROKE
200
NEEDED ON GASOLINE ENGINES TO IGNITE THE AIR FUEL MIXTURE.
What is IGNITION SYSTYEM
300
CONSISTS OF A TRANSMISSION AND DIFFERENTIAL IN ONE HOUSING
What is TRANSAXLE
300
CONTROLS OPENING OF THE VALVES
What is CAMSHAFT
300
MOST COMMON OF HAMMERS USED IN THE AUTOMOTIVE INDUSTRY, HAS A FLAT SIDE FOR STRIKING AND ROUNDED SIDE FOR SHAPING METAL.
What is BALL PEEN HAMMER
300
BOTH VALVES ARE CLOSED, PISTON SLIDES UP AND PRESSURIZES AIR FUEL MIXTURE, THIS READIES MIXTURE FOR COMBUSTION.
What is COMPRESSION STROKE
300
QUIETS THE NOISE PRODUCED DURING THE ENGINE OPERATION AND ROUTES ENGINE GASES TO THE REAR OF THE VEHICLE.
What is EXHAUST SYSTEM
400
A SET OF GEARS AND SHAFTS THAT TRANSMITS POWER FROM THE DRIVE SHAFT TO THE AXLES
What is DIFFERENTIAL
400
SEALS THE SMALL GAP AROUND THE SIDES OF THE PISTON. KEEPS THE COMBUSTION PRESSURE AND OIL FROM LEAKING BETWEEN THE PISTON AND THE CYLINDER WALL
What is RINGS
400
USED TO HOLD PARTS DURING CUTTING, DRILLING, HAMMERING AND PRESSING OPERATIONS
What is VICE
400
EXHAUST VALVE OPENS, INTAKE VALVE REMAINS CLOSED. PISTON SLIDES UP PUSHING BURNED GASES UP OUT OF CYLINDER
What is EXHAUST STROKE
400
MAINTAINS A CONSTANT ENGINE OPERATING TEMPERATURE.
What is COOLING SYSTEM
500
USES INTERNAL HYDRAULIC SYSTEM, AND IN MOST CASES ELECTRONIC CONTROLS TO SHIFT GEARS
What is AUTOMATIC TRANSMISSION
500
OPENS AND CLOSE TO CONTROL THE FLOW OF THE AIR FUEL MIXTURE INTO THE COMBUSTION CHAMBER AND THE EXHAUST GASES OUT OF THE COMBUSTION CHAMBER
What is VAVES
500
WHAT ARE THE 4 TOOL RULES THAT SHOULD BE REMEMBERED.
What is PURCHASE QUALITY TOOLS, KEEP TOOLS ORGANIZED, KEEP TOOLS CLEAN, AND USE THE RIGHT TOOL FOR THE JOB.
500
SMALL CAVITY (HALLOW AREA) BETWEEN THE TOP OF THE PISTON AND THE BOTTOM OF THE CYLINDER HEAD. THE BURNING OF THE AIR FUEL MIXTURE OCCURS IN HERE
What is COMBUSTION CHAMBER
500
HAS A POWERFUL ELECTRIC MOTOR THAT ROTATES THE ENGINE CRANKSHAFT UNTIL THE ENGINE FIRES AND RUNS ON ITS OWN POWER.
What is STARTING SYSTEM
M
e
n
u