Body Stuff
Welding
Numbers
Just for kicks....
More kicks
100

Tapering edges of paint so that it gradually blends in with the metal surface is called_________.

feathering

100
MIG stands for ___________.
Metal Inert Gas
100
How many pints are there in 1 quart?
2 pints = 1 quart
100
asphyxiation is anything that prevents normal _______.
What is breathing
100
What sandpaper is best used for glazing putty?
What is 120 grit
200
Body filler is used to ____________.
repair low spots
200

What 2 gases are most often mixed together and used when MIG welding steel?

Argon and C02

200
you are reducing 1 quart of basecoat with reducer. The ration is 2:1 If you reduce the entire quart of basecoat, how much sprayable material will you have? How would you solve this problem? a) 1pt b) 2pts c) 3pts d) 4pts
3pts.
200
True or false: A paint stick can be used to spread plastic filler.
False - use a plastic spreader.
200
why is a cutting torch also called a blow torch?
It blows away the slag
300
Before applying plastic filler, the substrate must be _____.
ground free of all paint and primers
300
What is probably the most important piece of PPE that you should wear while welding?
tinted welding glasses
300
A door requires 9 plastic clips. Each clip costs $.34 each. If you need to replace all the clips, how much will the total cost be including 8% sales tax? What are the steps to complete this problem and what is the answer?
9 x 34 = TOTAL Total x 1.08 = $3.30
300
What grit of sandpaper can be used after cheese grating?
36/40 grit
300
What is a typical wire diameter used when MIG welding in collision repair?
.030 inch
400

Cheese grating should be done when?

When filler is semi dry.

400
The acetylene hose is what color?
red
400

You have 128 ounces of car wash soap. You mix 2 oz of car wash soap into a 5 gallon paid of water. If you only wash one car per mixture, how many care washes can you get out of 1 gallon of concentrated car wash soap? explain how to get the answer and then what is it?

divide 128 by 2 = 64 washes

400
After lifting a vehicle with a hydraulic jack, whats the next step before work begins on it?
secure vehicle with jack stands
400
What is the device called that your gauges are attached to?
regulator
500
Plastic filler must be mixed with a __________
crème hardener
500
What type of fire extinguisher should be used in a body shop?
Types A,B, and C
500
You are preparing to mix primer to apply on an entire vehicle. You will be using the entire gallon. The ratio of primer to catalyst is 4:1 How much sprayable material will you have after mixing the two chemicals together? How will you solve this problem and what is the answer?
5 quarts convert the 1 gallon to 4 quarts. 4 primer 1 catalyst = 5 quarts material.
500
What gives a dent the adhesion it needs to hold the plastic filler?
grinding
500

What is Ms Kates last name?

Janicki :)

M
e
n
u