Engine
This part has lobes and controls the opening of the valves.
What is the camshaft?
This safety item should be worn at all times in the shop.
What is safety glasses?
This type of wrench has one end open and the other end closed.
What is a combination wrench?
Two types of brakes.
What is disc and drum?
The type of suspension system where movement in one wheel does not influence movement of the other wheel on the same axle.
What is independent suspension?
This engine stroke ignites the air/fuel mixture in the cylinder.
What is the power stroke?
These should be stored in a metal can with a lid after use.
What is dirty shop rags?
This tool is used for setting the tightness of nuts and bolts to a desired value.
What is a torque wrench?
This part squeezes the brake pads against the surface of the brake rotor.
What is the brake caliper?
This is the angle between the centerline of the wheel and the line perpendicular to the road surface.
What is camber?
This part changes up and down motion to rotational motion.
What is the crankshaft?
When lifting something heavy use your ________ instead of your back.
What is legs?
This hammer is used to install wheel covers.
What is a rubber mallot?
This part is designed to increase hydraulic pressure to the brakes.
What is the brake booster?
This is the tool used to measure caster and camber.
What is alignment equipment?
This engine stroke draws air/fuel into the combustion chamber.
What is the intake stroke?
This class of fire extinguisher is used on an electrical fire.
What is Class C?
These pliers with locking jaws are used to clamp and hold various parts.
What is vice grips?
What does DOT stand for?
What is Department of Transportation?
When the caster line leans forward while viewing the vehicle from the side.
What is negative caster?
This part links the piston to the crankshaft.
What is the connecting rod?
This type of injury is the most common in the automotive shop.
What is eye injury?
This is used when a small amount of material needs to be removed.
What is a file?
This is the tool used to measure the thickness of a brake rotor.
What is a micrometer?
This is the angle between the centerline of the vehicle when viewed from above and the centerline of the wheel.
What is toe?