6
Trim illustrations show how molding and trim pieces attach to the vehicle.
True or False
True
Mil Gauges are sometimes used to measure mechanical parts when high precision is important.
True or False
False
Micrometers measure small clearances inside parts.
True or False
False
The tool MOST likely to measure part movement and out-of-round in thousandths of an inch is:
a. The spring scale
b. The dial indicator
c. The feeler gauge
d. The micrometer
b. The dial indicator
While having a discussion, Tech A says that excessive pressure can be dangerous or damage parts. Tech B says that low air pressure may keep a tool from working properly. Who is correct?
a. A only
b. B only
c. Both A and B
d. Neither A nor B
c. Both A and B
_____basically divide a circle into 360 or more parts called degrees.
a. Angle measurements
b. Flow measurements
c. Inside measurements
d. Outside measurements
a. Angle measurements
All of the following are measuring tools EXCEPT
a. The sliding caliper
b. The micrometer
c. The gauge
d. The scuff plate
d. The scuff plate
All of the following represent types of calipers EXCEPT
a. The lateral caliper
b. The inside caliper
c. The outside caliper
d. the Hermaphrodite caliper
a. The lateral caliper
_______are used by paint suppliers and technicians to weigh the various ingredients when mixing paint materials.
a. Pressure gauges
b. Mixing scales
c. Dial thermometers
d. Flow meters
b. Mixing scales
Which of the following statements is LEAST likely true?
a. Standard mixing scales simply weigh each paint ingredient as it is poured into the mixing cup on the scale.
b. Proportional mixing means that for a specific volume of paint or other material, a specific amount of another material must be added.
c. A graduated pail has lines denoting volume for pouring and measuring liquid materials.
d. computerized intelligent scales allow automated paint mixing.
b. Proportional mixing means that for a specific volume of paint or other material, a specific amount of another material must be added.
The term MOST likely used to describe an instrument used to measure body temperature when painting is:
a. The pressure gauge
b. The caliper
c. The flow meter
d. The surface thermometer
d. The surface thermometer
While having a discussion, The A says that paint thickness is measured in cm. Tech B says that it is measured in liters. Who is correct?
a. A only
b. B only
c. Both A and B
d. Neither A nor B
d. Neither A nor B
Which of the following is LEAST likely a type of mil gauge?
a. Pencil
b. Gauge
c. Digital
d. Steel
d. Steel
_____is designed to help enhance the collision repair facility's productivity, profitability, and customer service by coordinating all aspects of collision repair.
a. Shop management software
b. Paint Color Directory
c. Vehicle Dimension Manual
d. Parts Interchange guide software.
a. Shop management software
_______gives instructions, safety warnings, and technical illustrations for specific makes and models of vehicles.
a. Vehicle Dimension Manual
b. Vehicle Repair Guides
c. Shop management software
d. MSDS
b. Vehicle Repair Guides
_______provides easy access to a user-customized database of recycled parts and suppliers in North America and Canada
a. Parts Interchange guide software
b. Salvage parts software
c. Vehicle dimension software
d. None of the above
b. Salvage parts software
The _______is used to find out how and when the vehicle was manufactured.
a. Vehicle Identification number
b. Paint code
c. Vehicle dimension software
d. shop management software
a. Vehicle Identification number
_______are drawings that show the location of electrical components.
a. Flow diagrams
b. Wiring diagrams
c. Hydraulic diagrams
d. Battery compartment diagrams
b. Wiring diagrams
The following information is usually included in a vehicle dimension manual or software EXCEPT
a. Complete upper body measurements
b. Wheel alignment specifications
c. Engine compartment measurements
d. Cost guides
d. Cost guides
Which of the following statements is NOT true?
a. Dividers have straight, sharp tips for taking measurements or marking parts for cutting.
b. Inside calipers are designed for measuring the inside of parts and are used the same way as outside calipers.
c. Sliding calipers will measure inside, outside, and depth dimensions with high accuracy
d. A lateral caliper will measure parts that run horizontally.
d. A lateral caliper will measure parts that run horizontally.
All of the following statements are advantages of electronic media or computer based service information over print media, EXCEPT
a. More quickly look up parts and labor information.
b. More efficiently cross reference and validate parts and prices
c. Print customized parts, assemblies, and repair illustrations for shop use.
d. File in fire proof store cabinets for local access
d. File in fire proof store cabinets for local access
Tech A says that any change in temperature makes a mercury thermometer give an inaccurate reading. Tech B says a digital thermometer is often used to check the output of an air conditioning system. Who is correct?
a. A only
b. B only
c. Both A and B
d. Neither A nor B
b. B only
_______is used to measure the fluidity or thickness of mixed materials, usually paint.
a. mixing scales
b. viscosity cup
c. graduated pail
d. Mil gauge
b. viscosity cup
Paint thickness is measured in
a. mils
b. cm
c. liters
d. inches
a. mils
A micrometer is used to measure:
a. the thickness of a brake rotor
b. The diameter of a tube
c. part movement
d. none of the above
a. the thickness of a brake rotor