Misc Safety Stuff
A _______is a written shop policy designed to protect the health and welfare of all employees.
a. Material Safety Data Sheet
b. Safety Program
c. OSHA (Occupational Safety & Health Admin)
d. NIOSH (National Institute for Occupational Safety & Health)
b. Safety Program
The type of respirator that does not require fit testing to make sure it works properly is the
a. welding respirator
b. dust respirator
c. air supplied respirator
d. cartridge filter respirator
c. air supplied respirator
While having a discussion, Tech A says that paint thinner or reducer can be used as a hand cleaner. Tech B says that paint thinner or reducer should never be used as a hand cleaner. Who is correct?
a. A only
b. B only
c. Both A and B
d. Neither A nor B
b. B only
________are the exact locations for positioning the lift pads of a lift or a floor jack to safely raise the vehicle off the ground.
a. welding points
b. vehicle lift points
c. vehicle stand points
d. pressure points
b. vehicle lift points
All of the following represent the type of extinguisher that should be used in a class C fire EXCEPT
a. carbon dioxide
b. foam
c. standard dry chemical
d. multipurpose dry chemical
a. carbon dioxide
Manufacturers instructions are the detailed procedures for products provided by the manufacturer.
True or False
True
Tech A says that the best shoes to wear in a shop should be impervious but be easily washed incase solvent or paint is sprayed on them. Tech B says the best shoes to wear should have metal toe inserts in them and non slip soles. Who is correct?
a. A only
b. B only
c. Both A and B
d. Neither A nor B
b. B only
_________includes those procedures that protect people and the earth's resources (land, water, and air) from toxic chemicals.
a. Environmental Safety
b. Occupational Safety
c. Right to Know Laws
d. Manufacturer's safety data sheets
a. Environmental Safety
While having a discussion, Tech A says that you should not use compressed air to clean clothes. Tech B says that even at low cleaning pressure, compressed air can cause dirt particles to become embedded in the skin, which can result in infection. Who is correct?
a. A only
b. B only
c. Both A and Bd. Neither A nor B
c. Both A and B
_______contain information on hazardous ingredients and protective measures that the technician should use.
a. Operating instructions
b. Right to Know Laws
c. Manufacturer's instructions
d. Material Safety Data Sheets.
d. Material Safety Data Sheets
Anything that prevents normal breathing is called:
a. electrocution
b. respiration malfunction
c. asphyxiation
d. fumigation
c. asphyxiation
________are often needed in the collision repair facility to keep airborne materials from being inhaled into your nose, throat, and lungs.
a. goggles
b. impervious gloves
c. respirators
d. jack stands
c. respirators
_______contains cancer causing agents.
a. vapor
b. spray mist
c. asbestos dust
d. carbon monoxide
c. asbestos dust
Technicians often use a ______to raise the front, sides, or rear of a vehicle while working.
a. jack stand
b. floor jack
c. compressor
d. floor shield
b. floor jack
The term MOST likely used to imply that a solution is aqueous with a pH of 2 and below, or 12.5 and above is:
a. ignitability
b. corrosiveness
c. reactivity
d. toxicity
b. corrosiveness
Fast moving air pressure waves that result from extremely rapid burning is called:
a. flash fire
b. flash burns
c. explosion
d. earthquake
c. explosion
A(n) _______protects against vapors and spray mists of one-part enamel (no hardener added), lacquers, and other nonisocyanate materials.
a. welding respirator
b. floor jack
c. air supplied respirator
d. cartridge filter respirator.
c. air supplied respirator
Which of the following statements is LEAST likely true?
a. Use a dustless sanding system to minimize exposure to toxic airborne dust particles caused by sanding automotive paints and primers.
b. Space heaters used in some shops can be a major source of CO.
c. Automotive type paints can safely be used on household items.
d. Asbestos was used in the manufacture of older brake and clutch assemblies.
c. Automotive type paints can safely be used on household items.
_______results when excess current causes wiring to overheat, melt, and burn.
a. reactivity
b. electrical fires
c. toxicity
d. spontaneous combustion
b. electrical fires
________, as determined by the Environmental Protection Agency (EPA) is a solid or liquid that can harm people and the environment.
a. asbestos dust
b. vapor
c. hazardous waste
d. spray mist
c. hazardous waste
The type of respirator that fits over your nose and mouth to block small airborne particles is called
a. cartridge filter respirator
b. welding respirator
c. dust respirator
d. air supplied respirator
c. dust respirator
A(n) _________has special cartridge inserts, designed to trap welding fumes.
a. welding respirator
b. floor jack
c. air supplied respirator
d. cartridge filter respirator
a. welding respirator
Which of the following statements is LEAST- likely true?
a. Never open several tool box drawers at once.
b. Keep chisels and punches properly ground and shaped.
c. Do not carry screwdrivers, punches, or other sharp hand tools in your pockets.
d. Always push, not pull, on a wrench.
d. Always push, not pull, on a wrench.
When chemically soiled rags or paper towels are left lying in a pile in the shop, they are prime candidates for ______.
a. asphyxiation
b. electrocution
c. electrical fires
d. spontaneous combustion.
d. spontaneous combustion
The term MOST likely used to refer to materials that leach one or more heavy metals in concentrations greater than 100 times primary drinking water standard concentrations is:
a. ignitability
b. corrosiveness
c. reactivity
d. toxicity
d. toxicity
_______specify essential information and stipulations for safely working with hazardous materials.
a. Right To Know Laws
b. MSDS
c. Manufacturers Instructions
d. Operating Instructions
a. Right To Know Laws
A _________includes many of the medical items needed to treat minor shop injuries.
first aid kit
_________refers to anything that prevents normal breathing.
Asphyxiation
_______should be worn when handling fluids that could burn your eyes.
Safety glasses
__________such as latex type or synthetic rubber gloves, should be used when working with any chemical that can be harmful if exposed to your skin, such as solvents or two part primers and topcoats.
impervious gloves
Name 3 possible air borne materials in the body shop that can cause health problems, particularly with repeated exposure.
abrasive dust
welding flux or soldering fumes
vapors from solution
spray mists
what is the purpose of a positive or negative pressure test?
it determines if the respirator is working properly.
Which of the follow present dangers to the air passages and lungs of a body shop technician?
a. dust
b. vapors from caustic solutions and solvents
c. spray mists from under coats and finishes.
d. all of the above
d. all of the above
Which respirator covers the entire head and neck area?
a. cartridge filter respirator
b. dust respirator
c. air supplied respirator
d. none of the abovec. air supplied respirator
Eye protection should be used when using
a. drills
b. hammers
c. cutting tools
d. all of the above
d. all of the above