My tailpipe is doing what
Engine operation/Parts
Engine Diagnosis
Engine Tests
That Stands for What?
100
White smoke
What is Coolant
100
What is a engine called with out the cylinder heads on it and has all the components installed.
What is short block
100
Worn engine bearing could cause what with oil pressure?
What is low
100
Tool that you hook to a OBDII 16 pin connector
What is scan tool
100
Used to estimate time needed for working on a vehicle.
What is Flat rate manual.
200
Black smoke
What is to much fuel
200
Operates the valves in an internal combustion engine.
What is Camshaft
200
Overfilling an engine with oil causes what.
What is air in the oil. (Foaming)
200
When performing a compression test all cylinders should be within how many percent of each other?
What is 10%
200
Technical Bulletins
What is bulletins that help a technician stay up-to-date with recent technical changes, repair problems, and other service related information.
300
Blue smoke
What is oil
300
The end cover of a cylinder in an internal combustion engine, against which the piston compresses the cylinder's contents.
What is Cylinder head
300
When performing a leak down test on a engine and you hear air coming out the tailpipe. What is the most likely cause?
What is valve
300
When performing a power balance test on a vehicle what are you checking for.
What is if each cylinder is producing equal power
300
DTC
What is Diagnostic trouble code.
400
White smoke on a cold morning
What is nothing
400
Name the four engine strokes starting with intake.
What is intake, compression, ignition, exhaust.
400
When performing a leak down test on a engine and you hear air coming out the oil fill cap. What is the most likely cause?
What is piston or rings
400
A test were use a scan tool to turn on and off engine controlling components
What is a Actuator test
400
ECM
What is Electronic Control Module
500
Goes rattle, rattle, clunk, clunk.
What is Andrews Truck
500
How many crankshaft rotations are needed to complete the four-stroke cycle?
What is 2
500
When performing a power balance test, all cylinders should have the same amount of RPM drop within what percentage.
What is 5%
500
When performing a compression test, you squirt oil into the cylinder and the compression goes up that is a indication of what worn out parts.
What is piston rings
500
PCM
What is Power train Control Module
M
e
n
u