Electrical
The neutral safety switch is located here in its circuit.
What is between the ignition switch and starter solenoid?
This circuit might use a relay. (Multiple answers)
What is horn circuit? Fuel pump?
This is something you should wear every time you're in a shop.
What are safety glasses?
This part transfers hydraulic pressure to the brake shoes. (Drum system)
What is the wheel cylinder?
This fluid tastes like TV static.
What is washer fluid?
The brushes in a starter transfer power between these two components.
What are the field coils and the armature?
This symptom may indicate a short to ground.
What is a blown fuse?
These are two chemicals we must separate when recycling.
What are coolant and oil?
This is the biggest symptom of brake pad FADE due to heat.
What is a hard pedal and reduced braking power?
The purpose of the charging system in a vehicle.
What is to generate AC current?
This tool allows us to test current without disassembling a circuit.
What is an amp clamp?
This type of fire extinguisher is the most common.
What is ABC?
This is something we should check first if the brake fluid level is low.
What are brake pads?
The name of the organization that issues tests for automotive technicians.
What is ASE?
The purpose of a fuse in a circuit.
What is to limit current flow?
The function of a relay.
What is a magnetic coil controlled by a small current will close a switch which controls a larger current?
This fluid should be washed off immediately if it touches your skin. (Multiple answers)
What is brake fluid? Coolant? Oil? Transmission fluid?
This is the job of the labyrinth seal on drum brakes.
What is to keep water out?
This is sometimes the issue when you cannot recreate a problem with a vehicle.
What is the loose nut between the seat and steering wheel?
The resistance of a series circuit with 12 volts and 8 amps.
What is 1.5 ohms?
This is the most common type of battery.
What is lead acid?
These will be required when you take a job in the industry/
What are steel-toed boots?
What is the biggest symptom of overheated rotors?
What is brake pulsation?
This is the recommended starting measurement/depth for the first fast cut of a rotor.
What is 0.004 in to 0.006 in?