The most commonly used and versatile socket handle is:
a. ratchet
b. flex bar
c. breaker bar
d.speed handle
What is ratchet.
100
Tech A says that shop air pressure is 100-150 PSI.
Tech B says that it is around 300 PSI.
Who is right?
What is TEch A
100
This can be caused by breathing toxic substances.
What is asphyxiation.
100
Specs are:
a. dimensions of parts
b. maximum wear limits of parts
c. measurements of specific parts
d. all of the above
d. all of the above.
200
A technician who is an expert in one or more automobile systems
What is a specialized technician.
200
Which wrench is best for a partiall rounded off bolt?
a. open end
b. 6-point box end
c. 12 point box end
d. None of the above
What is 6-point box end.
200
These impact sockets for power tools are identified by thier color, which is:
What is black
200
This harmful chemical has been linked to lung cancer and comes from brake and clutch parts.
What is asbestos.
200
A dial indicator measures parts in:
a. kilopacals
b. milimeters
c. hundredths of an inch
d. thousandths of an inch
What is thousandths of an inch
300
A technician who is working and learning under the instruction of an experienced technician
What is an apprentice technician.
300
Which is not a use for pliers?
a. cut
b. grip
c. bend
d. screw
What is screw.
300
These are used to support a vehicle while working under it.
What is Jack stands
300
If you are pulling on a wrench as hard as you can and the fastener does not turn, what do you do?
What is find a larger wrench.
300
Volume can be measured in all of these except:
a. liters
b. quarts
c. kilopascals
d. cubic inches
What is kilopascals
400
All of the following are automatic benefits of ASE certification except: a. recognition
b. a sleeve patch
c. a pay raise
d. a wall certificate
What is a pay raise.
400
Which is not a common socket drive size?
a. 1/4"
b. 3/8"
c. 5/8"
d 1/2"
What is 5/8".
400
Which is not a commonly used air tool?
a. impact wrench
b. air ratchet
c. air chisel
d. air saw
What is air saw.
400
True or false: car batteries can explode?
What is True
400
Which of the following micrometers is not used?
a. inside micromter
b. depth micrometer
c. width micrometer
d. an outside micrometer
What is width micrometer
500
How many ASE tests are there? And what are you if you pass them all?
What is eight, and "Master technician"
500
A swivel that lets the socket wrench or extension reach around obstacles.
What is Universal joint.
500
This press works like a hydraulic press, but at lower pressures.
a. arbor
b. steam
c. rotary
d. ratchet
What is arbor press.
500
Rules about fuel are true except:
a. store gas in approved containers
b. keep gas away from sources of heat
c. use quick dry to absorb any gas spills
d. never use gas as a cleaning solvent.
What is use quick dry to absorb any gas spills.
500
This gauge is used to measure small clearances between two parts.
a. telescoping gauge
b. feeler gauge
c. spring gauge
d none of the above