Static Electricity
Multimeter Tool
Drill Press Safety
Miter Saw Safety
Morse Code Device
100
A build up of electric charge unable to flow.
(question format) 
What is static electricity?
100
Tool that measures voltage, current, and resistance.
(question format)
What is a multimeter?
100
A machine that bores holes.
(question format)
What is a drill press?
100
A hand tool that can cut wood.
(question format)
What is miter saw?
100
A Morse Code device may look like this.
(question format)
What does a Morse Code device look like?
200
The positive and negative charged attract each other.
(question format)
Why does the balloon stick to the sweater?
200
A multimeter
(question format)
Which tool measures current, voltage, and resistance?
200
Safety Glasses / Goggles
(question format)
What must you always wear when using a drill?
200
Permission from the teacher
(question format)
What should be obtained from the instructor before working on the miter saw?
200
A method of communication in which characters are sequenced in two different signal durations using dots and dashes.
(question format)
What is Morse Code?
300
The negative charges repel each other because they are the same charge.
(question format)
Why do the negative charged repel each other?
300
Red probe of the multimeter.
(question format)
Which is the positive probe for the multimeter?
300
Clamped with an approved clamping device.
(question format)
What must be done to the stock prior to drilling?
300
Keep your hands at least 4 inches away from the blade when making a cut.
(question format)
How far should your finger be away from the saw blade?
300
...---...
(question format)
What is SOS?
400
The negative charges repel each other because they are the same charge.
(question format)
How to create static electricity?
400
Black probe of the multimeter.
(question format)
Which is the negative probe for the multimeter?
400
Tie back hair
(question format)
What must you tie up before using the drill press?
400
The safe operating position for your hands is to hold the workpiece with the left hand the saw handle with the right hand.
(question format)
How should you position your hands to use the miter saw?
400
-----
(question format)
What is 0?
500
The sudden movement of a charge. Zap!
(question format)
What is an electrical discharge?
500
Turn the multimeter to the continuity symbol and touch the probes together.
(question format)
How do you test for continuity?
500
The chuck
(question format)
What holds the bit in the drill press?
500
Always align the saw blade on the left side of the cutting line.
(question format)
What is the waste side of the board?
500
_._. .... ._.. ._.. / _ _ _ .._ _
(question format)
What is CHILL OUT?