ASTM F2096
This is the correct sensitivity of a Bubble Leak Test
What is 250 Micron
This is a mechanism that prevents package movement during inflation.
What is restraint?
This is the correct drop height to drop a shipper running AL 1 that weighs less than 20 Lbs.
What is 24 inches?
This can be used to improve accuracy and visual acuity.
What is magnification?
This is how to verify testing is in perfect condition.
What is overpackaging or repackaging after receipt?
These are the units recorded for Bubble Leak Testing
What is PSI?
This is when a package is internally pressurized to a specified pressure and maintains that pressure for a certain amount of time.
What is Creep Test?
This is the height Maximum Stack Height used when double stacking is avoided, or the package is small and lightweight.
What is 54in?
This is helpful to distinguish the edge of the sample for measurements.
What is color contrast?
This is what typically shares corner 2-3-5.
What is a Manufacturer's Joint?
This is why you can't introduce airflow prior to submerging samples.
What is Inconsistent Defect Detection?
This is why you record location variations of the entry point
What could affect the results of the test?
This can be used if the actual product might be hazardous.
What is a dummy load?
This is the error resulting from a change in observational relationship to a fixed position.
What is Parallax Error?
This condition is required to be met to ensure atmospheric conditions that may be detrimental to the product is hit.
What is the highest temperature and humidity limits?
This might happen when weak packages are exposed to water for too long
This cannot exceed the response rate of the of the pressure indicator and may affect the results of the test.
What is the rate of pressurization?
This is the ratio of the rebound velocity to the impact velocity.
What is Coefficient of Restitution?
Rounding up, down, or to the nearest 0.5mm.
What is a precision requirement example?
This can be done if dropping in a required orientation is not practical.
What is an equivalent incline or horizontal test substitution?
The blocking agent that prevents porous material from breathing excessively prior to observing the defect.
What is Steris Alcare Alcohol Foam and/or Steris Alcare Foamed Alcohol Hand Cleaner?
These are the two major classifications of barrier blocking agents.
What are labels or tape and/or non-solid agents such as foamy soap, liquid surfactants, or specialized barrier coatings?
This is the label on the X and Y axis of the transit graphs.
What is X= Frequency (Hz) and Y=PSD (G2/Hz)
This is the tolerance range of Linear Measurement.
What is 3mm?
This must be done if any velocity in a Test Sequence is below the required minimum level.
What is repeating the sequence until the test velocity meets the minimum?