DOOR HARDWARE
WHAT IS THE MOST COMMON DOOR BORE WHOLE SIZE FOR RESIDENTIAL DOOR HARDWARE
2 3/8 INCHES
WHAT IS THE COURSE AND FINE THREAD COUNTS FOR A 1/4'' BOLT
20 AND 28
WHAT WOULD I USE IF I WANTED TO CUT INTERNAL THREADS INTO SOMETHING
TAP
WHAT GRIT OF SAND PAPER IS FINER? 120 OR 220?
220
WHO IS OUR EMTEK REP?
JENNI
WHAT PROCESS DOES HARDWRAE GOES THROUGH TO BE CONSIDERED "LIFE TIME"
PVD OR PHISICAL VAPOR DEPOSISION
WHAT ARE THE TWO MOST COMMON CABINET HARDWARE MONTING SCREW SIZES
8-32 AND 4MM
WHAT ARE THE THREE DRIVE SIZES WE SELL FOR SOCKETS
1/4'', 3/8'', AND 1/2''
WHAT TYPE OF ADDHESIVE HAS TO BE MIXED
EPOXY
WHAT IS OUR COST MULTIPLIER FOR EMTEK
0.475
WHAT IS THE STANDARD BORE HOLE SPACING FOR RESIDENTIAL DOOR HARDWARE
5 1/2 INCHES
THERE ARE MULTIPLE WAYS OF GALVANIZING HARDWARE. WHAT PROCESS IS USED FOR OUR GALVANIZED FASTENERS
HOT DIP
A PILOT HOLE SHOULD BE SLIGHTLY _____ COMPARED TO ITS SCREW
SMALLER
WHAT PAINT DO WE SELL TO REPLACE OLD OIL BASED PAINT FOR DOORS CABINETS AND TRIM
ADVANCE
WHAT DIAMETER WOOD SCREW IS USED FOR DOOR HINGES
#9
WHAT KEY WAY COMES STANDARD FOR EMTEK AND BALDWIN
SC1 OR "C"
I WANT TO CONNECT TWO THREDED RODS FROM END TO END. WHAT SHOULD I USE
COUPLING NUT
WHAT TOOL IS USED TO MEASURE VERY PRECISLY
CALIPER
WHAT DO YOU DD TO PAINT TO MINIMIZE BRUSH STROKES
FLOO PENETRAL
WHAT YEAR WAS BERINGS FOUNDED?
1940
HOW MANY KEYS COME WITH A PATIO BOLT SET
ZERO OR NONE
WHEN WORKING WITH VEHICLES MOST FASTENERS WILL BE...
METRIC
HOW MANY VOLTS DOES AN M18 5.0AH HIGH OUTPUT BATTERY HAVE
18 VOLTS
WHAT IS THE COLOR NUMBER FOR BENJAMIN MOORE WHITE DOVE
OC-17
WHAT IS ALFREDS DOGS NAME
DYNAMO