Express 5/8 as a percent
.625%
The boiling point of a given liquid varies with?
Directly with pressure.
What is dwell time?
The amount of time it takes for the penetrant to activate
Where do you look to determine the operating CG range when calculating a new aircrafts weight and balance document?
Type Certificate Data Sheet(TCDS)

.430
What is the square root of 4 raised to the 5th Power
32
What 3 factors are necessary to determine power?
Force, Distance, Time
Magnetic particle inspection is used primarily to detect?
Flaws on or near the surface.
What is maximum zero fuel weight?
the maximum permissible weight without fuel.
Aspect ratio of a wing is defined as the ratio of the
Wing span to the wing chord.
The number 3.47 X 10 to the negative 4th power is equal to?
.000347
Which atmospheric conditions will cause the true landing speed of an aircraft to be the greatest?
High temperature with high humidity
(2) A discontinuity may or may not affect the usefulness of a part.
(Which Statements are true?)
Both 1&2 are True
How do you calculate the center of gravity.
Weight X Arm=Moment, then Total Weight/Total Moment
Which tool can be used to determine piston pin out of-round-wear?
Micrometer caliper.
Find the area of a triangle with these given sides (3", 4", and 7 1/2")?
6 square in.
If the fluid pressure is 800psi in a "1/2 in" line supplying an actuating cylinder with a piston area of "10 sq in", the force exerted on the piston would be?
8000lbs
What method of magnetic particle inspection may be used in practically all circular and longitudinal magnetization procedures?
Continuous
What determines whether the value of a moment is proceeded by a (+) or a (-) in aircraft weight and balance?
The result of a weight being added or removed and its location relative to the datum.
What controls pitch, roll, and yaw on an airplane?
Pitch-Elevator, Roll-Aileron, Yaw-Rudder
(-35 + 25)(-7)+(Pi)(16-2 )/sq root 25
14.002
What force must be applied to roll a 120pound barrel up an inclined plane 9ft long to a height of 3 feet?
(L/I=R/E)*
40pounds
List of steps in order for dye penetrant testing?
(1.) PPE (2.) Solvent and wipe (3.) Penetrant (4.) Developer.
2.5ft
When accomplishing loading computations for a small aircraft, necessary information obtained from the weight and balance record would include?
Current empty weight and empty weight CG