Isolating Brake Problems
Tires & Wheels
Wheel Bearings
Alignment & Suspension
Runout, Torque, Diagnosis
100

Before a road test, what should you check on the brake pedal?

What is brake pedal feel?

100

What document provides the manufacturer's recommended tire size and inflation pressure?

What is the tire placard?

100

What is the main job of a wheel bearing?

What is allowing the wheel to spin with little friction?

100

What suspension parts allow suspension and steering movement while helping control tire angles?

What are ball joints?

100

What tightening pattern should be used when installing wheel fasteners?

What is a criss-cross or star pattern?

200

During a road test, what are two things you should look, listen, and feel for?

What are pulling/drifting, steering wheel movement, brake pedal movement, or brake noise?

200

DAILY DOUBLE

What can worn, mismatched, or improperly inflated tires cause besides normal tire problems?

What are braking problems, including ABS and VSC problems?

200

What type of wheel bearing is commonly serviced as a sealed or unitized bearing?

What is a ball bearing?

200

What can worn ball joints cause?

What are changes in tire angles and vehicle pulling?

200

What tool should be used for the final tightening of wheel fasteners?

What is a torque wrench?

300

If a vehicle pulls while braking, what should a technician determine before replacing brake parts?

What is whether the problem is actually coming from the brake system or another system?

300

What can mismatched tires cause because they have different traction characteristics?

What is vehicle pulling?

300

What can excessive wheel-bearing play cause to the brake pedal?

What is a low initial brake pedal?

300

Which alignment angle is a tire-wearing angle: camber or caster?

What is camber?

300

DAILY DOUBLE

Incorrect or uneven wheel torque can cause what condition at the rotor?

What is rotor runout?

400

Why should a technician check the steering wheel for looseness or play before a road test?

What is to help identify problems that may affect vehicle control or braking?

400

What two tire conditions should be checked when inspecting tire wear?

What are the wear bars and rolling circumference?

400

What happens when a pressed or unitized wheel bearing fails?

What is replacement—the bearing cannot be adjusted?

400

Which alignment angle is a directional-control angle but is NOT a tire-wearing angle?

What is caster?

400

What can radial runout cause as the wheel rotates?

What is wheel hop?

500

A vehicle pulls to one side both with and without braking. What other systems should be investigated?

What are the steering, suspension, tires, and wheel alignment?

500

Why is regular tire rotation important?

What is to provide even tire wear and traction?

500

What is the basic service sequence for a tapered roller bearing?

What is remove, clean, lubricate, install, install the seal, and adjust?

500

A vehicle pulls one direction while moving forward but the opposite direction in reverse. What should you look for?

What are loose suspension parts?

500

What can lateral runout cause during braking?

What is shifting of the tire contact patch?

M
e
n
u