This the number you need to call to report your absence to the NSC.
What is 502-485-6487?
This involves everybody in the food chain.
What is Food Safety?
FIFO ensures the proper rotation of foods in storage. The acronym stands for this.
What is First In, First Out?
According to SOP 1-4, this is number one thing you can do to prevent diseases.
What is wash your hands?
Use this to tell the temperature of the product inside of the kettle without opening it.
What is the chart recorder?
This is the responsibility of everyone at the NSC.
What is safety?
These help prevent contamination, cross contamination and the introduction of foreign substances into the food supply.
What are Good Manufacturing Practices?
These help prevent the accidental startup of equipment during maintenance and repairs.
What are lockout/tagouts?
According to SOP 1-5, personal belongings shall be stored here.
What is in the employee's assigned locker?
This provides information about the safety of using chemicals
What is Safety Data Sheets (SDS)
This is when any incident (injury or accident) should be reported to an employees' direct supervisor.
What is immediately?
This physical removal of dirt from surfaces. It can include sweeping, wiping off tables, rinsing off dirt, and the use of detergent.
What is cleaning?
The four main functions of the NSC warehouse.
What is Receiving, Storage, Picking and Shipping?
According to SOP 2-1, after washing, rinsing and sanitizing equipment and parts must be allowed to do this.
What is air dry?
When taking apart the pump assembly in cook chill, these items must not be submerged in water.
What is the actuator?
Symptoms that would exclude employees from working in the NSC. Employees should be symptom free for 24 before returning to work.
What is vomiting and diarrhea?
This consists of treating a cleaned surface with an antimicrobial product in order to reduce or eliminate microorganisms.
What is sanitizing?
These are 2 of the most common hazards in a warehouse.
What are Slips, Trips and Falls & vehicle struck-by incidents?
The rinse display on the high temp machines in warewash must register at least 180 degrees F. According to SOP 2-5, we must use a thermometer to verify and record the cycle reached this minimium temperature.
What is 160 degrees F?
This product should be used to sanitize the drains.
What is Q-Rinse?
After an incident, these must scheduled outside of an employee's normal work hours.
What are follow-up visits?
These are the statutes that Good Manufacturing Practices follow.
What is CFR 21 217 and 211?
The full name of the U.S. government agency that ensures safe and healthful working conditions by setting and enforcing standards and providing training, outreach, and assistance.
What is the Occupational Safety and Health Administration?
According to SOP 6-3a, non-heated products shall measure 40 degrees F or lower within this many hours.
What is 4 hours?
According to SOP 11.1, this must added to any food product that is disposed of at the NSC.
What is dye?