Tools
What is the name of the tool you used to drill the holes to attach the table top panel
Kreg Jig
How long do you have once you put glue on the wood to get it clamped up
5min
Describe a Floating Tenon Joinery
Joinery where the tenon is independent of the two mortises. Or the Tenon is loss until glued up
Where do your hand never go on the Up cut saw?
Under the orange guards
What was name of the joinery we used on our table top frame
Miters
How many axis does the mutli router have
3 X, Y, Z
What is the last thing you do after gluing your parts together
Write down the time
How Do you describe a Rabbet
It runs along the edge. It only has one shoulder.
How high does the blade need to be on the table saw
Where the bottom of the gullit is on the top of the wood
Why is grain direction important when laying out your parts
The grain needs to follow itself around the cabinet for expiation and contraction of the wood
Name two types of Drill bits
Brad Point, Spiral, Forster, Spade, Hole Saw, Driver bit
What is the minimum time your parts need to stay in clamps
15min
What is the name of the tool we used to cut Dabo's and Rabbets?
Dado stack on the table saw
When drilling a whole in a piece of wood what do you use to prevent blow out
Spoil Board or Backer Board
Do you ever glue a panel on a cabinet
Never
Name Two types of Router Bits
Round over, Ogee, Cove, Compression, Flush Trim, Straight Fluted, ect...
Name two types of glue in the woods lab
Roo Glue, CA glue
How do you describe a Dado
It has two shoulders and is in the middle of a peice of wood.
When cutting to a line on the miter saw what side of the line do you cut on
Waste Side
What tools can I use to do a cross cut
Table Saw, Miter Saw, or Up Cut Saw
what is the name of the accessory we used on the router table to hold the wood tight to the fence.
Feather board
What all do you need to do a glue up
Paper Towel (1 wet), Mallet, Partner, Parts, Clamps
What other machine did we use to cut joinery this year
Multi router or Router table
Name two types of Squares
Carpenter, Combination, Kreg, Speed Square, T Square, Framing
Give 4 pieces of safety equipment in the Woods Lab
Fire Extinguisher, Ear protection, Dust collection, First Aid kit, Saw Stop ect..