Plywood
Name the three types of Plywood use in cabinet building
1.Fiber board (MDF, LDF, HDF)
2. Veneer Plywood
3. Particle Board
What is the decimal equivalent of 3/4"
.75
What is the best clamp to use for glue ups?
Parallel Clamps (bar clamps)
If I have 1 7/8" and subtract 1/16" what will my measurement be?
1 13/16"
How many views are on a set project plans?
4
What is different layers of plywood called
Crossbanded veneers
Which is smaller 3/16" or 1/8"
1/8"
Name two types of clamps NOT previously stated
F Clamps, Squeeze Clamps, or Strap Clamps
What is the decimal equivalent of 1/8"
.125
What is the 3D view called
Thumbnail Drawing
Name one type of plywood not used in cabinet making
OSB
What two machine do you use die calibers to measure the wood before run thru the machine
Planner and Time Saver
What is the name of the clamps attached to the benches
Vise
If I have board that is 3/4" thick and need to cut a dado in it how deep would I cut the dado and what is that measurement?
Half the thickness of the board or 3/8"
What does Scale mean
Using smaller measurements to represent a larger number
Name 3 comin thickness of plywood
3/4", 1/2", 1"
What is 1 1/8" + 3/8" = _ ___?
1 1/2"
What is the name of BIG clamp we used to glue up our tops?
JLT Clamp rack
If need a board that needs to be 16 1/2" long what would I cut the rough length to be?
18 1/2" to 20 1/2"
Do you ever free hand working Drawings?
No always use a ruler or straight edge
Water
Which is larger 3/4" or 7/8"
7/8"
Which clamps do we never use during glue up?
Trigger clamps (quick clamps)
What do the smallest marks on the Table Saw tape measure equal?
1/32"
Other then the picture of your project what information needs to be on the drawing
Measurements, Date, Name of Project, and Scale