This term is a process in which attestation of competency, authority, or credibility is presented to a laboratory
What is Laboratory Accreditation
100
A common candle emits light with a luminous intensity of roughly one of these SI units
What is the candela
100
In the company quality policy, this metric is for the maximum amount of workorder errors per technician
What are QC Errors
100
This action should be performed upon completion of every workorder to assist in reducing QC Errors
What is cert preview
100
According to QP-036 Laboratory Logbooks, what is required to be on the inside cover of the logbook before submitting to Quality Assurance
What is the Start and Finish dates
200
This public document is issued by our accreditation body to indicate what technologies we are accredited for
What is our Scope of Accreditation
200
This is the number of seconds in 2.75 days
What is 237600
200
This document is used to standardize our quality methods and decisions
What is the Quality Manual
200
In CPM this field in the boilerplate is used to designate that the datasheet is special for the customer or their individual piece of equipment.
What is the Custom Datasheet checkbox
200
This defines the information gathered from the customer on how we typically handle their calibrations that is viewable at every workorder
What is the Statement of Calibration Service (SCS)
300
This national standard requires our lab to ensure our PFA is less than or equal to 2% which is typically expressed as a TUR (Test Uncertainty Ratio)
What is ANSI Z540.3
300
A standard resistor with a resistance value of less than or equal to 0.1 ohm is often considered this
What is a shunt
300
This formal document identifies methodologies to verify performance parameters of equipment
What is a calibration procedure
300
In Make/Model module, this field defines the uppermost hierarchy that defines the type of equipment
What is Equipment Class
300
This is the primary reason for Info and Quality Docs folder links located on each laptop and desktop computer
What is document control
400
These are mathematical calculations that are required on a scope of accreditation to represent the Calibration Measurement Capability
What are Measurement Uncertainty Budgets
400
This is the largest single uncertainty contributor to dimensional measurements
What is temperature
400
The process to evaluate the processes, principles and operations of a laboratory
What is an internal audit
400
In Workorder Completion, this is the field that is used to designate the lab or location as to where the calibration was performed.
What is Lab Code field
400
In a Workorder Quote screen, this checkbox must be selected if any type of service is performed by an outside source
What is the Vendor checkbox
500
This organization governs laboratory accreditation throughout the world
What is ILAC
500
When a gas in an enclosed box and the box gets smaller this is what happens to the gas pressure
What is increases
500
This practice tries to analyze and solve problems by attempting to identify and correct the base causes of events, as opposed to simply addressing their symptoms.
What is Root Cause Analysis
500
This process tracked in LIMS allows us to determine in-tolerance probability and recall time of equipment
What is Interval Analysis
500
For in-house calibrations, this is the process of reviewing certificates, equipment cleanliness, labels and requested work before returning equipment to a customer