Safety
Tool names
Machine names
Finishing
Fastening
100
What is worn at all times in the shop?
What is safety glasses
100
What is the most common tool for measurement in the shop
What is the tape measure or ruler
100
What is the saw that is used to cut wood across the grain to length?
What is the radial arm or miter saw
100
What is the finishing product used to color wood ?
What is paint or stain.
100
What is it called when wood is connected without the used of screws ,nails or adhesives?
What are joints
200

When using a jig saw when do you start the blade 

after the base of the saw if firmly placed on the work piece 

200
What is the tool used for making 90 degree lines across work
What is tri-square or combination square
200

What saw has a long thin blade that runs up and down in a reciprocating motion 

What is the scroll saw

200
What should be done prior to applying paint or stain?
What is wipe or blow off sawdust from work
200
What is it called when a screw is driven below the surface of the wood?
What is counter sinked
300
What is the part of a machine in which supports the wood as it is pushed against it to keep it straight and avoid a kick back?
What is the fence
300
What is the tool that is used to hold pieces while working
What is a vice
300
What is the machine that thins wood out?
What is the planer
300
What is the name of a finishing product that will seal and provide protection to wood?
What is varnish, varathane, clear coat, oil.
300
What is the fastening method that uses small expanding oval wafers?
What is biscuit joining
400
What must be set before using the band saw ?
What is the blade gaurd
400
What is the screwdriver called with a square tip
What is the robertson screw driver
400
What is the machine that surfaces wood and has long flat semi-exposed blades
What is a jointer
400

What should be done in between coats of stain or finish?

What is lightly sanded or buffed with steel wool

400
What is the name of the process of gluing pieces of wood together edge on edge to make a larger piece.
What is laminating
500

What are the three things to remember about using a hand saw?

1. Never grab the saw by the blade 

2.Clamp the material being cut to a workbench 

3. Apply light pressure to let the saw cut 

500
What is the sharpened metal tool which can chip away wood?
What is the chisel
500
What is the machine called that puts edges on wood thru a series of different shaping bits?
What is a router
500
What type of finishing products would you use on pressure treated or preserved wood?
What is none, they already are treated with products
500
What are the nails coated with zinc metal to prevent rust called?
What are galvanised nails
M
e
n
u