General Safety
Safety Controls
Fire/Other Emergencies
PPE
3030 Safety
100
The key to handling all accidents and injuries in the workplace
What is: Prevention
100
How often should you inspect electrical equipment?
What is: Before each use
100
No matter what the severity you should report this to your supervisor.
What is: all injuries and near misses.
100
Type of glasses not approved to protect against eye hazards.
What is: Regular prescription glasses
100
What is the #1 Body part injured in Cast Iron maintenance the last 4 years?
What is: HANDS
200
What you should do whenever you see an unsafe condition in the workplace
What is: REPORT IT using an HCIR card
200
Who is allowed to enter a confined space?
What is: A trained authorized personal only.
200
What are two types of fire extinguisher's and what types of fire can they put out?
What is:
200
Name of the first responder in your work area
What is:
200
List the three identifiers of a confined space?
What is: Large enough to bodily enter.
Not designed for continuous human occupancy.
Restricted means of entry or exit.
300
The government agency responsible for regulations which keep employees safe on the job
What is: OSHA-
OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION
300
What blocks the flow of electrical energy in a lockout / tagout?
What is: the "disconnect"
300
In the event of an emergency you should
What is: Dial 911 from an internal phone and do not hang up. Or call radio 100.
300
Where is the safety standard marked on footwear?
What is: the tongue / inside .
300
What are the top 4 "concerns" or "precautions" in maintenance.
What is: 1.Hands
2.Eyes on path
3.Line of Fire
4.Pinch Points
HELP
400
When lifting a heavy object, the back should be kept _____________________ and the knees should be _________________________.
What is: STRAIGHT back AND BENT knees
400
A proactive service available on site to associates when they feel the onset of an ache or pain.
What is: Blankenheim services
400
In the event of a evacuation what should be done first?
What is: Shut down all equipment.
400
When using a cutting device such as a knife, these are available to the operator?
What is: cut resistant gloves
400
To report a hazardous condition in your work area you fill out a ?
What is: A HCIR card.
500
When trying to determine how heavy something is what should you do first?
What is: Lift a corner and test the weight before lifting the entire object
500
Adapting the workplace to the needs of the worker so that the worker does not sustain injury from repetitive tasks
What is ERGONOMICS?
500
Anytime an accident/near miss occurs, this should be completed a member of management.
What is: What is an accident/incident/near miss report in Intelex
500
At what decibel level is hearing protection required?
What is: When noise levels exceed 85dB.
500
Number of recordable injuries in Cast Iron maintenance year to date?
What is: 6