These 3 components of a signal are effected by modulation
What are Phase, Frequency & Amplitude
SAFE
What is stop, assess, focus, eliminate
TRUE OR FALSE: Depending on what service the customer is subscribed to, they may get an HSD only modem or an eMTA installed
What is False
Station wire (phone) contains ____ pairs
What is 2
This is the leg that an eMTA should be connected to when being fed by an amp/ISA.
What is Passive Leg/3.5 dB loss
Floor noise at Charter is set to ______ dBmV
What is -40
GOAL
What is get out and look
These devices also use the 2.4 & 5 GHz band and therefore can interfere with WiFi connectivity
What are Bluetooth
TRUE OR FALSE: Customers can subscribe to a single-play service for Phone only.
What is False
The height requirement for your safety cones is ____ to _____
What is 28 to 36 inches
This is an analog distortion caused by voltage on carriers 60 Hz or 120 Hz
What is Hum Modulation
CMTS
What is cable modem termination system
This command prompt will display the route from source to destination
What is Traceroute
This is a common issue with Standard 2-Pair phone wiring. Its symptoms include hearing part of a conversation from another circuit while using your phone.
What is Crosstalk
The correct order of steps in the troubleshooting model are
What are Analyze, Isolate, Fix, Verify
This part of coaxial cable is critical in maintaining the 75 ohms of characteristic impedance because it provides separation between the two conductors within the cable.
What is the dielectric
What is Quadrature Amplitude Modulation
This command prompt can be used to test latency of a website
What is continuous ping
When splicing CAT5 phone wire with existing CAT3 wire, match the ORANGE/WHITE with __________
What is Black
If a conductor is broken in phone this impairment is called _________
What is an open
256 QAM carries _____ bits per symbol and has 64 symbols
What is 8
DOCSIS
What is Data Over Cable Service Interface Specifications
To test the speed capacity of the plant using your meter, you would run a _________ test on the coax.
What is Throughput
This is the Telco demarcation point
What is NID (network interface device)
This measurement represents the overall quality of a digital signal
What is MER