Ethernet
MAC Table
Switches
Switching Methods
Misc
100

The most common LAN type in the world

A: What is Ethernet?

100

The destination MAC address of the Ethernet frame as it leaves the PC if the final destination is a web server on another network

A: What is Default Gateway (Router’s interface)?

100

Action when a switch receives a frame with the destination MAC address FF:FF:FF:FF:FF:FF

A: What is The switch forwards it out all ports except the ingress port?

100

Two examples of the cut-through switching method

A: What are Fast-forward switching and Fragment-free?

100

A feature that automatically configures of an interface for a straight-through or a crossover Ethernet cable connection

A: What is the Auto-MDIX?

200

Field used to determine if errors occurred in the transmission and reception

A: What is Frame Check Sequence (FCS)?

200

Addresses used to build and maintain a MAC address table

Addresses used to build and maintain a MAC address table

200

Memory buffering method used in asymmetric switching (where frames are being exchanged between ports of different rates)

A: What is Shared Memory Buffering?

200

Switching method that has the lowest level of latency 




A: What is Fast-Forward?

200

Switching method that uses the CRC value in a frame




A: What is Store-and-forward?

300

01-00-5E-00-00-03 is this type of address

A: What is Multicast MAC address?

300

Address used by the switch to forward frames

A: What is the Destination MAC address?

300

Action of a host when it receives a frame with a destination MAC address it does not recognize




A: What is The host will discard the frame?

300

Advantage of store-and-forward switching method compared with the cut-through switching method

  A: What is  Frame error checking?

300

One advantage of using the cut-through switching method instead of the store-and-forward switching method

A: What is It has a lower latency appropriate for high-performance computing applications?

400

Data link sublayer that is implemented in software and used to communicate with the upper layers of the protocol suite

A: What is the Logical Link Control (LLC)?

400

Action of a switch that receives a frame and does have the source MAC address in the MAC table

A: What is The switch refreshes the timer on that entry?

400

Action of a switch if it receives a frame with the destination MAC address 01:00:5E:00:00:D9

A: What is The switch forwards it out all ports except the ingress port?

400

Part of the Ethernet frame used to perform an error check




A: What is CRC in the trailer?

400

Results of connecting two modern, never been configured switches using a straight-through cable

A: What are The link between the switches will work at the fastest speed that is supported by both switches, The link between switches will work as full-duplex, and The auto-MDIX feature will configure the interfaces eliminating the need for a crossover cable?

500

Action of a Cisco Ethernet switch when it receives a runt frame

A: What is The frame is dropped?

500

Two potential network problems resulting from Mac Table

A: What are Multiple broadcasts can cause communication delays and Network hackers could manipulate the Mac Table mapping resulting in the interception of data?

500

Action of a host when it receives a frame with a destination MAC address of FF:FF:FF:FF:FF:FF



A: What is The host will process the frame?

500

Three characteristics of the cut-through switching method

A: What are It forward frames after receiving the destination address field, Less latency than a store-and-forward and Could transmit a corrupt or runt frame?

500

Three characteristics of store-and-forward switching method

A: What are Always stores the entire frame before forwarding,  Checks its CRC to detect errors and Checks its frame length?

M
e
n
u