Pre-Trip Inspection – Engine Compartment
Pre-Trip Inspection – Inside the Cab
Pre-Trip Inspection – Safety Equipment
General Knowledge (Class B Core Test)
Air Brakes
100

These belts should not be frayed and should have no more than 3/4 inch of play.

What are the alternator, water pump, and air compressor belts?

100

Before starting your trip, make sure this device is working to alert others in case of an emergency.

What is the horn?

100

Every commercial vehicle must carry at least these three items for emergencies.

What are fire extinguisher, spare fuses, and reflective triangles?

100

What is the minimum Gross Vehicle Weight Rating (GVWR) for a vehicle that requires a Class B CDL?

26,001 pounds or more.

100

The air compressor governor controls:

When air is pumped into the air tanks (cut-in and cut-out pressure).

200

This fluid must be checked to ensure proper lubrication and prevent engine damage.

What is engine oil?

200

This gauge should build to at least 100–125 psi in vehicles with air brakes.

What is the air pressure gauge?

200

The fire extinguisher must be rated for this class of fires and be fully charged.

What is a 5 B:C or higher rating?

200

What is the maximum legal blood-alcohol concentration (BAC) for a CDL driver?

0.04%.

200

The air pressure should build from 85 to 100 psi within how many seconds?

45 seconds.

300

The alternator, air compressor, and water pump should all be securely mounted and not leaking this.

What is oil, coolant, or air?

300

These devices must work correctly to keep the windshield clear in bad weather.

What are the wipers and washers?

300

This document must always be in the vehicle and includes information about the last inspection.

What is the vehicle inspection report (DVIR)?

300

When approaching a railroad crossing, you should stop between what distances from the nearest rail?

15 to 50 feet.

300

What is the typical “cut-out” pressure when the governor stops the compressor?

 Around 125 psi.

400

This part must be inspected for secure mounting and no visible leaks since it provides compressed air for the brakes.

What is the air compressor?

400

You test these lights to ensure they function before starting your route — both the red and amber ones.

What are the warning and indicator lights on the dashboard?

400

These should be checked to make sure all emergency exits open easily and latch securely.

What are the emergency windows and roof hatches?

400

If you are driving a heavy vehicle down a steep grade, what’s the safest way to control your speed?

Use a lower gear and apply the brakes intermittently (snub braking).

400

The “cut-in” pressure (when the governor turns the compressor back on) is usually around:

100 psi.

500

These should be tight and free of corrosion to ensure electrical systems work properly.

What are battery terminals and cables?

500

This control must function properly to ensure the parking brake holds the vehicle when engaged.

What is the parking brake (or hand brake) control?

500

You must inspect these to ensure they’re in place and that all passengers can access them quickly in an emergency.

What are seatbelts and safety restraints?

500

When starting a vehicle from a stop on a hill, you should:

Use the parking brake to hold the vehicle until the clutch engages.

500

The low air pressure warning must activate before the tank pressure drops below this value.

What is 60 psi?

M
e
n
u