FARS
A commercial airline will usually operate under which FARs?
121
Airworthiness Directives (Ads) are designed to notify the
aircraft owners and other interested persons of unsafe conditions and prescribes the condition under which the product may continue to be operated
ICA
Instructions for continued airworthiness
How often must the altimeter of an aircraft inspected under FAR part 91 be inspected?
every 24 months
What is the purpose of an AC Conformity Inspection?
The purpose of an aircraft conformity inspection is to verify that your aircraft conforms to its type design and is configured/bridged to your approved program and operations.
Which FARs lists the requirements for the information that must be included in an inspection logbook entry?
43.11
What is an AMOC and what is it used for
AMOC stands for Alternate Methods of Compliance. AMOCs are approved by the FAA and allow the Owner / Operator to comply with the AD with an alternate method
STC
Supplemental Type Certificate
How often must the static system of an aircraft operated under part 91 be inspected?
every 24 months
Where would you find the required placard for an Aircraft?
Aircraft Type Certificate Data Sheet
FAR part 145 applies to?
Repair stations
When performing an Airworthiness Directive that directs you to perform a Service Bulletin at revision R1 dated 12/Nov/2023 you must
follow the instructions with no deviations and perform SB R1 dated 12/Nov/2023
TCDS
type certificate data sheet
How often must an ELT be inspected?
every 12 months
In addition to the Approved Inspection Program compliance, you need to verify if any additional inspections are due by
Reviewing the AC records for ICAs or AWLs applied by Modification or Repairs
Airworthy is defined by the FARs as
conforming to its type design and in a condition for safe operation
What is the definition for Federal Aviation Administration ADs
Airworthiness Directives (ADs) are Mandatory legally enforceable regulations issued by the FAA to address unsafe conditions in aircraft, engines, propellers, or appliances.
RII
required inspection item
Can a person under the direct supervision of an A&P physically perform a 100 hour inspection?
No
How can you verify if an Airspeed Indicator conformity
Verify the limits in the TCDS against the indicator in the AC.
FAR 135 applies to
OPERATING REQUIREMENTS: COMMUTER AND ON DEMAND OPERATIONS
When must an AD be performed
CAMP
Continuous Airworthiness Maintenance Program (CAMP)
You are ready to do a 100 hour inspection but find that you have no checklist available. You should
Create a checklist IAW FAR 43 App. D
When a Major Modification is performed on an AC you must
Provide instruction for Continued Airworthiness. Inspections required and Maintenance procedure to maintain the system / Installation