8 Deadly Sins
Falling
QA
Bucking
Safety
100

Falling sin #1

What is failure to cut an escape route 10ft or 3m from the base of the tree
100

When do you need to set a wedge?

Everytime unless the tree has pronounced favorable lean

100

The three parts of QA?

Difficulty

Emergency

Injury

100

You pinch your bar in a cut, what do you not do?

Try and reef on your chainsaw or wiggle trying to free it

100

What PPE is required for running saw?

Chaps, gloves, hard hat, hearing protection, whistle, hi viz, boots

200

Falling sin #8

Working within 2 tree length radius of a tree being felled

200

When do we use a swanson undercut?

Short and stubby, upslope falling, when you want the tree to commit to the direction of fall

200

What is the travel time for injury and emergency?

10 minutes surface travel

200

What does the R-E-C acronym stand for?

Recognize

Evaluate

Control

200

What distance should your swamper be behind you?

10 feet

300

Falling sin #7

Brushing of standing trees where brushing can be avoided

300
What is the minimum and maximum percentage step height for a conventional under cut?

Minimum 5% and maximum 10% of the tree diameter

300

Who & what is needed for QA for an emergency?

BCO and chainsaw

300

You evaluate a log that needs to be bucked you not the bottom of the log appears to be the compression side. What kind of bind is this and how do you cut it?

Bottom bind, cut from the bottom 25% and finish from the top

300

How often are check ins and what counts as a check in?

20-30 minutes and verbal, radio or able to hear chain saw braaaaaapin

400

Falling sin #4

Failing to fall dangerous trees before performing work in the area made hazardous by the dangerous tree

400

You have a tree you know you're going to wedge, what should your undercut depth be?

25% =/- 5%

400

What is the time requirement for difficulty QA?

Readily available and identified

400

You determine you have a side bind, should you stand in the compression or tension side when making your cuts?

Compression

400

What are the three things you must inspect on your saw prior to firing up?

chain brake, throttle lock, chain catcher

500

Falling sin #3

Failing to use proper falling cuts

Sufficient undercut

Undercut complete and cleaned out

Sufficient holding wood

Anti kickback step

Wedges and Axe readily available at the stump

500

What are three hazards of a heavy leaner?

Barberchair, root pull, premature fall, bar pinching

500

Who can be difficulty QA for a 180 day faller?

A certified faller familiar with the difficulty

500

You come across a jackpot of downed trees with multiple binds in play, what do you do?

Call for QA

500

How do you enter and exit an active falling area?

Contact faller, confirm if any trees are cut up, notify faller once clear of falling area

M
e
n
u