brake calipers
more about brake calipers
brake rotors
brake principal and procedures
brake pads
tools
100

this keeps moisture and contaminants out of the caliper piston. !!!test related!!!

dust boot

100

brake calipers are made of what 2 materials !!!test related!!!

aluminum and cast iron

100

solid rotors are usually found on ______. !!!test related!!!

the front brakes of small compact vehicle or vehicle with rear disc brakes

100

uneven lug nut torque can cause _______. !!!test related!!!

pulsating brake pedal

100

what are the 2 ways that the pad lining is fasted to the backing plate of the brake pad.!!!test related!!!

bonded and riveted

100

what tool can be used to retract/push in a brake caliper pistons

double jeopardy

c clamp, brake caliper depressor/compressor, brake caliper spreader. all acceptable

200

what must happen in order to removed the brake pads from a floating caliper system. !!!test related!!!

double jeopardy

remove the brake caliper

200

what type of brake caliper does not move when the brakes are applied !!!test related!!!

fixed caliper

200

a vibration or pulsation in the brake pedal or steering wheel is usually caused by !!!test related!!!

warped rotors (runout)

200

which type brake system requires more force to achieve adequate braking

disc brakes

200

what should be preformed after installing new brake pads and/or rotors. !!!test related!!!

pad break in, burnishing, bedding, seating, pump the brake pedal. all acceptable

200

what is corrected when machining a brake rotor on the brake lathe. !!!test related!!!

runout, parallelism, thickness variation, scoring. all acceptable

300

typical floating mounted calipers have how many pistons

!!!test related!!!

1

300

what position is the bleeder screw located on a brake caliper !!!test related!!!

at the top

300


A resurfaced rotor must be _____ inch thicker than the discard dimension to allow for wear.
(A.001 to .005) (B.005 to .010) (C.015 to .030) (D.040 to .080) !!!test related!!!


C. .015 to .030

300

what are the advantages of disc brake over drum brakes. 1 of 3 answers acceptable. !!!test related!!!

can handle more heat/ automatically adjust for wear/ less likely to fade

300

how many brake pads are used per on each brake assembly

2

300

what is a dial indicator used for on brake systems !!! test related!!!

runout

400

when a brake caliper is found to be faulty or bad what is typically done.

!!!test related!!!

replaced

400

what type of brake caliper moves when the brakes are applied !!!test related!!!

sliding or floating caliper

400

name 2 things that can cause pedal pulsation. 4 different answers available !!!test related!!!

double jeopardy

excessive runout/ excessive parallelism/ uneven lug nut torque/ thickness variation.

400

what can happen to new brake pads if unnecessary hard braking happens within the first 200 miles. !!!test related!!!

double jeopardy

glazing

400

what should you refer to for brake break in procedure

manufacturer specification or recommendation

400

what is a disc brake micrometer used for !!!test related!!!

double jeopardy

brake rotor thickness, thickness variation, parallelism

500

fixed mounted calipers typically have at least how may pistons

!!!test related!!!

2

500

what is being prevented when the brake caliper is hung by a wire or bungee chord after removal. !!!test related!!!

damage to the brake hose

500

what 3 things should brake rotors be checked for. all required !!! test related!!!

thickness, parallelism/thickness variation, runout

500

what 2 items are used to direct air over the brake rotor to aid in cooling !!!test related!!! both required

backing plate/dust shield/splash shield and the wheel

500

what are 2 types of pad wear indicators

audible, electric or pad wear sensor

500

what tools can be used to check brake pad thickness

digital/dial caliper, brake pad wear gauge, or  tread depth gauge

M
e
n
u