Hearing and Breathing
First Aid, CPR & AED
Fall Protection, Forklifts & Telehandlers
Confined Spaces, LOTO, and Permits
PPE and
Electrical Safety
Electrical Safety
100
According to OSHA any noise exposure above ____ Decibels over an 8-hour period requires hearing protection.
85 decibels
100
Name the procedure you would perform on a choking adult.
Heimlich Maneuver
100
Any height above ____ feet requires fall protection consisting of railing, netting, or harness.
4 feet
100
Who is authorized to issue a safe work permit, hot work permit, or confined space permit?
Shift lead/supervisor (or board operator in the absence of supervisor).
100
Leather gloves should not be worn when handling these....
Acids, Caustic, and Chemicals
200
An individual who is not fit tested may still wear a respirator as long as a supervisor or management gives the ok.
True or False
False.
All employees MUST be fit tested prior to wearing a respirator. Never will an employee who has not been fit tested be allowed to wear a respirator of any type.
200
For High-quality CPR, the proper chest compressions rate is between ____ and ____ compressions per minute.
100, 120
200
How often should a fall harness and lanyard be inspected.
800 points extra if you can tell me when a harness expires.
A visual inspection before each use with a full documented inspection annually.
There is no expiration on a harness as long as they pass inspection. OSHA "recommends" replacing after 10 years.
200
What is this lockout device?
Hasp
200
Safety glasses should free from these.
Scratches and damages.
300
Name two types of hearing protection.
1. _____________
2. _____________
Double the points if you can identify the third method if the two above aren't sufficient.
1. Earmuffs
2. Earplugs
Bonus: Combination of muffs and plugs
300
What are the instructions for using an AED?
1. Turn it on.
2. Follow the prompts.
300
When loading or unloading materials with a forklift, operators should always check that the load is balanced and secure before doing this.
Moving the forklift.
300
Prior to entering a confined space, a _____ _____ must be completed in addition to the pertinent permits and reviewed by all members involved in the task.
Rescue Plan
300
If you are standing at this distance from someone and unable to maintain a conversation by talking, hearing protection is required.
3 feet
400
What is the difference between "User seal check" and "Fit test"?
User Seal Check is performed each time the employee puts on the respirator to ensure a good seal and has no air leaks which could allow hazardous or toxic air to enter.
A Fit Test is performed by a third party to ensure the employee is healthy enough and capable of wearing a respirator as required by OSHA.
400
What does CPR stand for?
Cardiopulmonary Resuscitation
400
This is used to calculate the height, and load capacity which translates to lifting limitations of a forklift or telehandler.
Load chart or Load capacity Chart
400
This type of work is not to be performed in a confined space that contains explosive, flammable hazards or oxygen in concentration greater than 23.5%
Hot work
400
What is the term used to describe "putting on" PPE?
Donning
500
What is the common name for the part of the ear known as the tympanic membrane?
Eardrum
500
What does AED stand for?
A - Automated
E - External
D - Defibrillator
500
If you do not have a clear path ahead (especially when backing up) you need to use this safety measure.
A spotter.
500
A device which blocks the movement of energy through a system. For example a water valve, air valve, gas valve, or electrical switch.
Answer correctly and each member on your team gets a prize.
Energy Isolation Device
500
Before working from heights or in a confined space and everyone involved with the task must be included in the review of the _______ _____ before any work begins.
500 points to the opposing team if you guess incorrect.
Rescue Plan