Unit 1
Unit 2
Unit 3
Unit 4
????
100
According to the Enterprise Wheel, the three main features that create the customer centered wheel.
What are Product/Process, Manufacturing and Customer support?
100
This term is the number of revolutions per minute that is made by the cutting tool of a machine.
What is Spindle Speed?
100
Used by pipe fitters and electrical technicians, this additive manufacturing process combines parts together to form more useful objects.
What is Joining?
100
The x-coordinate of the Cartesian coordinate system tells the robot to do this type of motion.
What is movement from left to right?
100
This manufacturing concept is the Japanese word for continuous improvement.
What is Kaizan?
200
According to the PLTW Design Process, after your team completes your decision matrix you should move to this step.
What is Develop a Solution?
200
This button is used to ensure safety on machines in manufacturing to immediately halt production.
What is an emergency stop button?
200
As seen in the picture below, this manufacturing process applies force to cause a material to permanently take shape. 
What is Forming?
200
A technician may need to use the tangent function to achieve this important palletization technique in Robotics.
What is Roll Angle?
200
This manufacturing concept applies a systematic approach to eliminate waste that was made popular by the Toyoda.
What is Lean Manufacturing?
300
In flow charting, which symbol is used for storage?
What is an upside-down triangle? 
300
This holding device is used to provide repeatable accuracy and interchangeability for manufactured parts.
What is a Jig?
300
The object below has a surface area of this amount in to the nearest whole number in cm3:
What is 212cm3?
300
This type of robot applies the following work envelope:
What is Cylindrical?
300
This manufacturing concept allows companies to create floor plans to groups machines and operators in close proximity for cost effective solutions.
What is WorkCell?
400
Increasing or decreasing volume on a stereo system is an example of this type of system (Open or closed.)
What is an open system?
400
This spindle speed should be used for an aluminum part with a cut speed of 250 feet per minute and a 1/8 end mill. Round your answer to the nearest whole number.
What is 7643 rpm?
400
The object below has a volume of this amount in to the nearest whole number in cm3:
What is 205 cm3 ?
400
This robot is known for it's swiveling motion and applies this envelope:
What is SCARA Robot?
400
This manufacturing concept is a production model in which items are created to meet specific demand, not created in surplus or in advance of need.
What is Just In Time?
500
Hydraulic fracturing, or fracking, is a drilling method used to extract petroleum from deep in the planet. In the fracking process, cracks in and below Earth's surface are opened and widened by injecting water, chemicals, and sand at high pressure. This extracting process would be considered __________ manufacturing.
What is primary manufacturing?
500
Using this line of G&M Code:
N14 G03 X1.75 Y1.5 I1.75 J1
a CNC machine would perform this action. BE SPECFIC!
What is move the cutting tool in a COUNTERCLOCKWISE interpolation to the (x,y) location around the center point ( i, j)?
500
This diagram is used to make life easier on the manufacturing floor.
It is called this.
What is process flow diagram?
500
Operations completed with different types of matchines can be coordinated using this process.
What is handshaking?
500
Six Sigma is a measure of quality that every manufacturing strives to achieve. Fewer than this amount have have defects out of a million opportunities.
What is 3.4 defects?