Access Security
When you configure the "enable" command, which mode are you configuring?
What is the Privileged Exec mode?
What is the first mode you are in when you see the switch name in this format? Switch>
What is User Executive?
What is the full command to rename the device to NELSON?
What is hostname NELSON?
If you ping a switch from a pc and it fails, the first thing you confirm on the switch is?
What is the vlan configured with an IP address?
"This protocol uses port 25 and is responsible for sending email messages between servers. What is it?"
What is SMTP?
When you configure the "enable" command, what is the full command when it is a plain text password of "cisco"? no abbreviations
What is enable password "cisco"
What is the command to elevate your access from the user executive mode? no abbreviations
What is enable?
What command are you adding a password for securing the privilege mode? without encryption
What is enable?
If you ping the switch, and it has an ip address configured and you ping fails, what is the most likely cause?
What the vlan is in shutdown state?
"This protocol uses port 443 and encrypts web traffic to ensure secure communication. What is it?"
What is HTTPS?
When you configure the console 0 or Line VTYpassword class, what additional command do you add to require the password you added?
What is login?
What is the mode you are in when you see the switch name in this format? Switch#
What is Privileged Executive?
This message type is displayed to users upon login and is often used to communicate legal warnings or system notices. What is it?
What is the Message of the Day (MOTD) banner?
What is no ip address?
"This protocol, using port 53, translates domain names into IP addresses. What is it?"
What is DNS?
What do you type for the configuration to have a encrypted privileged Executive password as itssecure?
What is enable secret itssecure?
What is the command from Switch# that you use to elevate to the programming mode? - full words no abbreviation
What is configure terminal?
What is service password-encrypted?
When you configure the console 0 password class, and the password isn't working, what command isnt configured?
What is login?
"This protocol uses port 22 and is commonly used for secure remote login and command execution. What is it?"
What is SSH?
If you are configuring your device to be accessed through the network instead of the console, what 3 commands do you use to secure all the virtual ports with a password class and require the use of that password?
What is
line vty 0 15
password class
login?
What is the command to return from switch#(config-line) to switch#?
What is End or Ctrl+ Z?
What password will work to access the privileged mode if enable password class and enable secret itsasecret are entered?
What is itsasecret?
What is the name of the protocol for ping?
What is ICMP?
"This protocol uses port 161 and is used to monitor and manage network devices. What is it?"
What is SNMP?