Network Protocols
Network Access
Network Layer
IP Addressing
Transport Layer
100
process of modifying data to an acceptable format for transmission
What is encoding
100
the maximum rate at which data can be carried over a specific medium
What is bandwidth
100
the process of sending packets to hosts on a remote network
What is routing
100
a numbering system consisting of the digits 0 and 1, used by computers to perform operations
What is binary
100
a connection-oriented reliable protocol that uses a 3-way handshake
What is TCP
200
process of modifying transmitted data into a format that is usable by a device
What is decoding
200
the actual amount of data, in bits, that crosses a given point in a network over a certain period of time
What is throughput
200
the largest PDU that is supported
What is maximum transmission unit
200
one section of an IP address, consisting of a group of 8 bits
What is octet
200
a connectionless protocol that has little overhead and is used for communication data such as voice and video
What is UDP
300
process of inserting a formatted message inside another formatted message
What is encapsulation
300
the amount of usable data that crosses a given point in a network over a certain period of time
What is goodput
300
a value that limits the the lifetime of a packet
What is Time-to-Live
300
determining a digit value based on the digit position, used in converting from one numbering system to another
What is positional notation
300
a data delivery method that has no service guarantee
What is best effort delivery
400
process of splitting data into smaller pieces for transmission on a network
What is segmentation
400
interference that is caused when the electromagnetic field of one device affects the electromagnetic field of other devices
What is electromagnetic interference
400
the trustworthiness of a route
What is administrative distance
400
a continuous sequence of 1 bits followed by a continuous sequence of 0 bits, used to determine the network portion of an IP address
What is subnet mask
400
used to describe the reliable nature of TCP. The connection refers to the 3-way handshake required in TCP before data transmission.
What is connection-oriented
500
process of removing a formatted message from another formatted message
What is de-encapsulation
500
electromagnetic interference that is in the radio frequency range
What is radio frequency interference
500
the destination router indicated by the outgoing interface entry in the routing table
What is next-hop
500
a binary process used to determine the network address of a host address by using the host address subnet mask
What is ANDing
500
a value between 1024 and 65535 used to uniquely identify the source application or process on a local host
What is source port
M
e
n
u