Basic Safe Material Handling
BSMH con't
Personal Safety
Equipment Safety
Maintenance
100
Responsible for providing detailed safety information on their equipment.
What are Equipment vendors.
100
Workplace training is most effective when it is ......
What is interactive and fully involves workers
100
Responsible for ensuring employees are trained on equipment operation and hazards.
What is the employer.
100
Once trucks are positioned at the dock, they must be restrained by using .......
What are wheel chocks, trailer restraints (dock locks)
100
Type maintenance when dealing with a malfunction or failure after it has occurred.
What is corrective maintenance.
200
Defined as "Seizing, holding, grasping, turning, or otherwise working with the hand or fingers."
What is manual material handling.
200
These are a few of the guidlines for safe lifting and carrying
What are testing the load for stability and weight, plan the lift, avoid lifting from the floor, work within your power zone.
200
Depending on the frequency of use, equipment readiness checks should be performed at least......
What is daily or before each operation.
200
Dock communication lights are used to .......
What is help control dock/trailer loading/movement
200
The care and servicing of equipment to ensure satisfactory operation and to provide early detection of possible failures, defects or hazards.
What is preventive maintenance.
300
Demands of work tasks and human capabilities is called.....
What is the fit.
300
PPE is indentified by conducting a .....
What is a job hazard assessment
300
Ear protection is necessary when the equipment decibel rating is at or above ......
What is 85 decibels for an average 8 hour day.
300
A green interior communication light signals this ......
What is a vehicle is waiting and it is safe to open the dock door.
300
An operating checklist is an example of what type maintenance?
What is preventive maintenance.
400
The main risk factors or conditions associated with the development of injuries in manual material handling tasks include these.
What are awkward positions repetitive motions forceful exertions pressure points static postures
400
Types of PPE
What are hard hats, hand and arm protection, lung protection, feet protection, eye/face protection, ear protection.
400
An employee may be protected from water, falling objects, dirt, sparks, etc by using......
What is head protection.
400
Storage Rack capacity ratings tell the employee ....
What is the weight limitations of the rack based upon the strength of components of the rack system.
400
Replacing a flat tire is an example of what type maintenance?
What is corrective maintenance.
500
These poor environmental conditions may increase workers' chances of developing work related problems.
What are extreme heat, cold, noise and poor lighting.
500
The most common PPE
What is steel-toed boots.
500
Burns, cuts, pinches and chemical or biohazard exposure can be mitigated by using ......
What is hand and arm protection.
500
Audible alarms on dock doors are designed to tell an employee.....
What is the dock door is about to open/close
500
Equipment operation checklists are usually provided to the employee by .........
What is the manufacturer or the employer.
M
e
n
u