Siding
What is the most common siding material?
Vinyl
Which is more expensive: Galvanized or Aluminum gutters?
Aluminum
How long do we have to create and send an addendum back to sales once the PFYNR is uploaded and the job moved to the approval queue?
48 hours
Name 5 things that you might request D&Red when replacing siding.
Doorbell, light fixture, meter, junction box, hose bib, exterior outlet, dryer vent, shutters, other?
What components are included in Xactamate's vinyl siding R&R line item?
Vinyl siding, starter strip, under sill trim, j-trim, inside and outside corner posts, staples, and installation labor.
From the side of the gutter that sits flush against the fascia board to the outer edge of the gutter that extends past the roofline.
Measure the gutter from the back (where it's attached to the roof) to the front lip.
What is the average hard cost (materials and labor) for one SF of vinyl siding?
$5
Is J trim around a window included in the R&R line item for siding?
No
What is the difference between Vinyl Siding and Board & Batten Vinyl Siding?
Vinyl is typically placed horizontally, board & batten is installed vertically.
B&B is a style of vinyl siding that features wide vertical planks (boards) with narrow strips (battens) placed over the seams.
What are the types of gutter elbows?
A-style and B-style
What is the OOP cost to R&R 98 LF of 5" gutters/downspouts in DEN?
5" Gutters $1,334.83
What is Cap Flashing and what trades would the replacement of it come up?
metal flashing made to cover parapet walls.
TPO, EPDM, Metal Roof
What is the difference between hardboard siding and fiber cement siding?
There are two major differences between the two; hardboard is more lightweight and cement board is less expensive.
Hardboard siding is made primarily from compressed wood fibers and resin, making it less durable than fiber cement siding.
Fiber Cement is a composite material made from cement, sand, and cellulose fibers, offering significantly greater resistance to moisture, weather, and pests.
Fiber cement siding is considered a much more durable and long-lasting option compared to hardboard siding.
What is the difference between an A elbow and a B elbow?
An A-style elbow is wider than it is tall. If you are looking at the downspout, an A-elbow discharges directly at you.
B-style is taller than it is wide. If you are looking at the downspout, the B-elbow turns to the right or left.
How do you make and submit an addendum to a homeowner?
Use the form and send via docusign.
What are the two types of panels for metal roofs?
Standing Seam and Exposed Seam
What does vinyl, steel/aluminum, hardboard, and wood siding look like when damaged by hail?
Vinyl has holes, steel has hail indentations, hardboard doesn't get damaged but if it did it would look chipped, wood is either chipped exposing raw wood or chipped paint.
How far away must you extend downspouts from the wall in Aurora, CO?
All roofs of Group R occupancies that are sloped to drain over the edges shall have gutters and downspouts. All downspouts shall have at least a five-foot splash block or a five-foot downspout hinged section to direct water away from foundations.
https://aurora.municipal.codes/Code/22-148
What about addendums are you most worried about?
open answer
Name all the additional trades that will 'officially' go live in some or all branches next week.
Siding, windows, interior/drywall, painting, fascia, fencing, flat/metal roofs.
Already happening: gutters, solar, attics