G-CODE 1
A rapid move G-Code.
What is G0?
A CW arc G-Code?
What is G2?
The command to call out the tool length offset.
What is G43?
The code to call for a tool change.
What is M6?
The variable used when cutting stock at a predetermined rate. IPM or IPR.
What is F?
G76 Command
What is thread cutting canned cycle?
The command where the spindle RPM increases as the tool moves toward the center of the part.
What is G96?
A point to point feed move G-Code?
What is G1?
A home position move in incremental G-Code.
What is G28?
The G-Code to cancel a canned cycle.
What is G80?
The code used to start the spindle rotation CW.
What is M3?
The variable used to set cutter or spindle rotation amount per minute.
What is S?
Max spindle speed command.
What is G50?
The feed per minute command.
What is G98?
Absolute positioning G-Code?
What is G90?
The code used in peck drilling cycles.
What is G83?
The code to cancel cutter compensation.
What is G40?
A code that is used to end and rewind the program
What is M30?
The rough facing/turning cycle command.
What is G71?
The finish facing/turning canned cycle command.
What is G70?
The XY plane.
What is G17?
Work offset command G-Code?
What is G54?
A spot drill cycle G-Code.
What is G82?
The code to turn cutter compensation on to the left.
What is G41?
A code used to stop the program. Non-toggleable.
What is M0?
Code used for arc center in "Y" axis. Incremental.
What is J?
The O.D./I.D. grooving canned cycle command.
What is the G75 Command?
G99 Command
What is Feed Per Revolution?
A CCW arc move G-Code.
What is G3?
A tapping cycle G-Code.
What is G84?
The code to turn cutter compensation on to the right.
What is G42?
The code used to pause a program. Toggleable.
What is M1?
A code used in drill cycles to determine peck amount.
What is Q?
G97 Command
What is constant spindle speed?
The number of places in a program name.
What is 5?