Safety
Tools
Foundation/Framing
Exterior Finish
Interior finish
100

The proper angle for setting up a ladder is to place its base ____ of the working length of a ladder from the wall or vertical surface. 

a quarter

100

Double-insulated tools are designed to prevent 

electric shock

100

The ingredients in concrete are water, gravel, cement and 

sand

100

Which of the following would be an appropriate material to use for roof flashing?

Cooper

100

Where is the vapor barrier located in an exterior wall?

the warm side of the house

200

Compliance with ____ standards can not only help to prevent needless accidents, but can also help minimize the number of injury-related absences as well as keep workers' compensation and other insurance cost to a minimum.  

OSAH

200

The size of the hammer is determined by the  

weight of the head

200

What dictates the size and depth of wall footings?

State and local codes and geographic location

200

An Exterior Insulation Finish System (EIFS) gives an exterior finish similar to 

Stucco

200

A cabinet door hinge with an easy adjustment characteristic is the  ______ hinge

European

300

According to OSHA safety regulations, guardrails or personal fall arrest systems for fall prevention/protection are required for workers on scaffold platforms_____ high or higher 

8 Feet

300

Which instrument can be used to measure the difference in elevation between two points on a hill?

builder's level

300

Framing members that run horizontally along the foundation wall forms to keep it straight are the  

walers

300

The R-value of insulation refers to its

resistance to heat loss

400

A Safety Data Sheet (SDS) provides information about the first aid measure, handling and storage and

stability and reactivity 

400

A combination square may be used to lay out a 

45 degree and a ____angle.

90 degree

400

The total run for a stair with 12 unit rises and a unit run of 10 inches

110 inches

400

How many 4-feet by 8-feet drywall sheets are needed to fully cover all walls and ceiling of a room that is 12 feet wide by 8 feet long by 8 feet high

13

500

When using a utility knife to cut building material, cut____ the worker's body

away from

500

On drawing where 1/4 inch = 1 foot, a line measuring 2- 1/2 inches represents an actual distance of 

10 feet, 0 inches

500

The window type that is hinged on the side and swinging out is called a/an ______

casement

M
e
n
u