Converting Quality
What does FFG Stand for?
What is Flexo Folder Gluer
How many 16ths of an inch can you be OOS on total length or total width of a corrugated sheet?
What is 1/16th of an inch
The terminology of an order type that is equivalent to a warehouse release order?
What is a Calloff?
GMP is an acronym for what?
What are Good Manufacturing Practices?
The defined process of "Assuring that lines are cleared between order runs to ensure that products are not comingled" is called what?
What is always the #1 Goal here at Coal Center Smurfit Westrock?
What is Safety?
What is always the "no fail basic" if you cannot make a box/sheet to spec?
What is call your supervisor
How many passing scans must each barcode have on a box?
What is 3 scans
What is the name of the quality check that measures the strength of the bond in a corrugated board?
What is Pin Adhesion?
Our strapper operators and shippers are often referred to as our last line of ______ because they are the last ones to see our product before our customer.
What is Defense
HACCP Stands for What?
What is Hazard Analysis of Critical Control points?
What is the terminology used for a sellable sample box/sheet that is marked up with dimension and print checks sitting at the machine-side table during order runs?
What is a strike Box/Stike board
When was this building built?
What is 1997
What is the name of the computer program that we use to track and enter quality checks during an order run?
What is QMS?
What is our range for Ink Viscosity?
What is 18-26 seconds
What is the test frequency of a Soak Test?
What is 2-hour intervals
What are 2 things that a strapper/bander operator should be looking for when evaluating the overall quality and appearance of a unit?
What are missing straps, straps too tight/loose, incorrect dunnage, no tie-ins, scrap, straight and uniform loads, correct load tags/unit counts, visible load tags, contamination, and/or customer special instructions.
GMPs are universally regulated and enforced by what government agency?
What is the FDA (Food & Drug Administration)
What is the defined term of "Checking one box per Unit" called?
What is Box assesment?
What year was the Apstar installed at the coal center plant?
What is 2015
When a Die-board needs to be repaired what color tag should be placed on the D/B?
What is the color Red
Name 4 things that must be on your strikebox?
What are Dimensions, Print check, Caliper, Glue fiber tear, score line markings, Arrows/clear writing, checked off spec sheets, Sign off sticker (op, Assist, help, sup)
What is the target for combined board moisture?
What is 7.5%
What is a legal document between the shipper of a particular good and the carrier called?
What is a BOL/Docket
Good hygeine, no food, no drink, and no tobacco use on the floor are examples of what?
What are Good Manufacturing Practice (GMP)
What does RMA Stand for?
What is Returned Material Authorization
Who were the original owners of Timberline packaging?
Who is Bill Hutchinson, Dennis McCullough, & James Glick
What color spray paint is used on dunnage?
What is Orange Spray paint?
What is the target & Range for Gap?
What is a .375 target with a .250 to .500 range
Name 2 raw materials used in the production of corrugated board
What is Roll stock/paper, Steam, adhesive, & Starch
What menu is used in our scanning system when you need to move or change a unit/load?
What is the Fork Hoist menu?
What 3 Hazards does the HACCP program adress?
What are Biological, Chemical & Physical Hazards
What does DPPM stand for?
What are defective Parts Per Million
Who is the longest standing active customer from when we opened?
Who is Sensus
What is the following statement called? We aspire to be the premier partner and unrivaled provider of winning solutions for our customer.
What is the Quality policy?