safety
what is The heart of the hydraulic system, it initiates braking when the break pedal is depressed.
A series of finned tubes that function as a heat exchanger.
is designed to cool the passenger compartment.
disc orbital sander used to remove scratches
what is Metal tubing and rubber hose for transmitting pressure to wheel brake assemblies
A belt that transmits motions from the driveshaft to the water pump fan and the generator and alternator.
draws warm air out of the passenger compartment to provide a cooling effect.
a tool used for sanding perfectly straight contour lines on panels
what is body line sanding guide
When working under a vehicle the most important safety step is to
What is The use of fluid pressure to force air out of the brake line connections or wheel cylinder bleeder screws.
A hose between the radiator and the engine block that supplies cooling.
contains high-pressure/high-temperature refrigerant
what is A/C high-side
the catalyst, in liquid or cream form
What is Friction unit that is pushed against the disc, by the action of the master cylinder and power booster
Draws air through the radiator
contains low-pressure/low-temperature refrigerant.
What is A/C low-side
flat surface used for mixing the filler and its hardener
what is mixing board
What is a Brake part made of cast iron that is clamped against both sides by pads.
It is a pump in the vehicle that causes water to circulate
causes the refrigerant pressure to drop to produce a cooling action in the evaporator.
What is Expansion valve
done by thoroughly squeezing its contents back and forth inside the tube
what is hardener kneading