Documents
What does RFP stand for?
What is Request For Proposal.
Name the five drawings that commercial building projects have.
What is:
Civil engineering and site survey drawings
Architectural drawings
Structural engineering drawings
Mechanical engineering drawings
Electrical engineering drawings
This tool is used to mark long straight lines, such as needed for laying out a wall on a floor.
What is a chalk line?
HVAC stands for...
What is Heat, Ventilation & Air Conditioning
Define:
Submittals.
What is:
Shop drawings, material data, samples, and product data.
What is covered in division 1 in Masterformat?
What is General Conditions.
Name the element found in a Structural Drawing:
Indicates all subgrade elements, including piles, caissons, footings, and foundation walls.
What is foundation plan.
Phillips, Slotted, Torx, or Square are the heads found on this tool.
What is a screwdriver?
It's the underlying base or substructure of a building
what is foundation?
What is the Masterformat?
What is:
The writing standard for most commercial building design and construction projects in North America
Construction documents consist of two major physical components. What are they?
What is the project manual and the drawings.
Mechanical engineering drawings, usually identified by what symbol?
What is "M".
It has two parallel jaws that are used to hold whatever you are working on in place.
What is a vise?
The process of refilling trenches or holes created during excavation, especially around foundations.
What is backfilling?
Define:
Addenda
What is:
Bulletins of additional information that are relevant to the contract documents issued during the bid period.
The construction documents usually do not indicate the way in which the project will be built. True/False?
What is True.
(Means and Methods)
List six sections that might be found in an architectural drawings.
What is:
1. Index, symbols, abbreviations, notes, location map
2. Site plan and details
3. Demolition plans
4. Floor plan
5. Roof plan
6. Ceiling plan
7.Building sections
8. Wall sections
9. Exterior Elevations
10. Schedules
11. Large Scale Floor Plan
12. Exterior detail
13.Interior detail
14. Interior elevations
One side is flat for pounding, while the other side has a claw that is used to remove nails without damaging the surface of your material.
What is a claw hammer?
They run horizontally along the main walls of a building at ceiling level, supporting the structure.
What are beams?
What is a Request for Proposal?
What is:
A document given out by a client to attract bids from potential vendors for there service.
What is the primary purpose of the construction drawings?
What is:
To communicate the intended elements, systems, and relationships of the materials, equipment, and assemblies to the contractor in the construction of the facility.
The drawings and Project Manual are not considered a full set of documents. True/False?
What is False.
It measures the distance between itself and other objects.
What is a laser level?
The person authorized to identify existing and predictable hazards in surrounding or working conditions and take corrective measures to eliminate them.
What is a competent person?
What is the main purpose for a Proposal?
What is:
To reveal price to the client.