Guard Rails
Guardrail system
What is a system of components including posts, top rail, mid-rail and toe board?
The weight/force needed to be withstood for an anchor point for a personal fall arrest system.
What is 5,000 pounds per person?
Name the person who is responsible for implementing the fall protection plan at the job site?
Competent Person
The height at which OSHA requires fall protection for construction activities?
What is 6 feet?
what should be completed before using a ladder.
An Inspection
Barrier erected to prevent employees from falling to lower levels
Guardrails
This is most effective when it is above the employee's head. Located as to not allow an employee to fall more than 6 feet.
What is an anchorage point?
When excavations 6-feet or more in depth cannot be readily seen because of plant growth or other visual barriers, what must the employer provide to employees.
Fall protection
It consists of a harness, lanyard and anchor point and is abbreviated "PFA".
What is a personal fall arrest system?
A marking line positioned 6 feet from a leading edge is an example of this kind of system.
What is a "Warning Line System"?
Employers must provide employees with fall protection equipment and complete employee ______________ when they can be exposed to fall hazards.
Training
A gap or void 2" inches or more in its least dimension in a floor, roof, or other walking/working surface
Hole
Systems employers can provide to protect workers from falls....
Guardrails, PFAS (personal fall arrest systems), safety nets
This is a potentially fatal condition that can result after suffering a fall in a harness.
What is "Suspension Trauma"?
Which employees may be permitted to work in a CAZ?
Designated employees
The harness "D-ring" should be positioned ________
Between shoulder blades
This saying refers to U-bolts used to connect wire rope
"Never saddle a dead horse"
DAILY DOUBLE
Stair rails are needed when there is this many or more risers, or more than 30" high.
What is "4 risers"?
Who is the person responsible for preparing and developing a fall protection plan when the use of conventional fall protection is not feasible...
Qualified Person
Hole covers shall be capable of supporting without failure at least _______ the weight of employees, equipment, and materials that may be imposed on the cover at any one time, be ________ when installed, and marked with the word ________ or ________ to provide warning of the hazard.
Twice
Secured
Hole / Cover