Life-saving rules
The number of GSK's lifesaving rules
What are 12?
The meaning of the acronym LMRA
What is Last Minute Risk Assessment?
The meaning of the acronym "MEWPS"
What is Mobile Elevating Work Platform?
The person who physically locks out or tags out equipment before servicing
Who is the authorized employee?
This type of tool should be tethered when used at height to prevent it from becoming a dropped object.
What is a hand tool?
Complete the sentence with the last 3 words: "Nothing we do for GSK is more important than...."
What is "going home safe"?
The meaning of the acronym SIF
What is Serious Injury or Fatality?
When moving extended distances, more than a few feet, only this individual is allowed in the unit
Who is the operator?
This must be attached to a lockout device and must clearly identify the employee applying it.
What is a tag?
OSHA requires that this type of area be barricaded below elevated work to prevent personnel from entering drop zones
What is a danger or exclusion zone?
This is GSK's first Universal Rule
What is "Safe Workplace"?
The LMRA is used for this kind of activity
PSIF or SIF
Suspension trauma strap systems must always be used with this system
What is a "fall arrest system"?
Employees must receive this when they are involved in lockout/tagout procedures.
What is training?
The safe practice of not storing loose materials or tools near open edges or ledges.
What is good housekeeping?
This is the number of Universal Rules listed by GSK
What are 3?
This activity takes place at the end of the day's proceedings
What is a huddle?
When driving a MEWP on uneven terrain, this function should be avoided unless absolutely necessary and permitted by the manufacturer.
What is elevating the platform?
This is what must be done before removing locks and returning equipment to service
What is notifying affected employees and ensuring equipment is safe to operate?
This documented analysis identifies tasks where there is a risk of dropped objects and outlines control measures.
What is a Job Safety Analysis (JSA)?
Rule number 8 refers to P.I.Ts. but is more commonly known as this
What are Powered Industrial Trucks?
The LMRA document is attached to this
What is the Permit to Work record
This must be done if a MEWP is found to be defective or unsafe during inspection
What is removing the MEWP from service and reporting the defect immediately?
These must be identified and controlled before servicing equipment.
What are energy sources?
Taglines, tool lanyards, and barricades are examples of these types of controls
What are administrative and engineering controls?