Falls
PPE & General Safety
Silica
Excavation
Safety Potluck
100
-Required at openings -Support 200 lbs -Can be made from wood or cable
What is a guardrail/handrail?
100
Wear safety glasses and a face shield.
What is the proper PPE for cutting or grinding
100
Wet Cutting
What is a method of preventing silica exposure?
100
5 feet
At what depth should excavations be sloped or shored?
100
To prevent future Accidents
Why should an accident investigation be done?
200
A metal reinforced plastic cap
What is a rebar cap?
200
140 dba
Exposure to impact or impulsive noise shall not exceed this level?
200
Notify your Foreman or Superintendent, and cease working in that area.
What do you do if another trade is causing a silica hazard near you?
200
When an excavation reaches this depth, stairs, ladders or ramps must be provided.
What is 4 feet?
200
- do not stand on the top of me - I have three basic types - I cannot be repaired what am I?
What is a ladder.
300
5000 LBS
What is the minimum rating for an Anchor Point?
300
The Placement of a lock on an energy isolating device.
What is Lock Out Tag Out?
300
Crystalline Silica.
What is a known human lung carcinogen?
300
Equipment back up alarms are not required.
When a signal person is used for backing operations
300
(T or F) Taking the OSHA 30 HR course makes you an OSHA Competent person
False
400
10 feet.
At what height should guardrails be used on a supported scaffold?
400
Used when working and maneuvering along large wall forms
What are positioning hooks?
400
Permissible exposure limit of crystalline Silica
What is 50 ug/m3
400
- when it rains - Before each shift - If heavy equipment is operating nearby
When must an excavation be inspected?
400
I protect small tools and equipment.
What is a circuit Breaker?
500
6" to 12"
A 10 foot scaffold plank should overlap its end by what length?
500
Engineering out the hazard
What is the best hazard mitigation practice?
500
4 ways to find out if a material has silica?
1) Check the lable 2) Check the SDS 3) Review published data 4) Send a sample to be tested
500
This has to be designed by a certified engineer before employees enter.
What is an excavation deeper then 20 feet?
500
- Be polite and respectful - Ask to Notify your foreman, Superintendent or Safety Director - Give short but honest answers
What is the proper procedure for an OSHA inspection.
M
e
n
u