Electrical
Plumbing
Framing
Safety
Tools
100
The size wire do we use for lights and plugs
What is 14/2
100
Type of metal the water lines are usually made out of.
What is copper.
100
The type of nail used to secure two 2 x 4's.
What is 16d (penny)
100
Type of safety glasses required in construction.
What is the Z87.
100
The tool you would use for to cut an arc on a piece of plywood like the toolbox.
What is the jigsaw.
200
This wire is connected to the green screw.
What is the ground wire.
200
Name of the new material replacing copper because it is cheaper and faster to use.
What is "pex"
200
The name of the wood on the top of the wall you built.
What is the top plate.
200
The direction you should strip a wire with a utility knife when stripping the casing off.
What is away from you.
200
Before you change a sawblade, you must
What is unplug the saw.
300
You should not heat this material when sweating pipe.
What is Joint or solder
300
Name of the board that holds up the header and redistributes it's weight.
What is the header.
300
The type of shoes you can not wear in the tech lab.
What are sandels or moccasins.
300
The two saws where it is essential that you stand to the side while cutting.
What are the table saw and circular saw.
400
The black wire is considered this
What is "hot"
400
The process of prepping a pipe.
What is cut, sand,flux,sweat
400
The board that starts at the top plate and ends at the sole or bottom plate.
What is a full stud, King Stud, or stud.
400
What to look for on medication that would warn you not to work in the lab.
What is "do not use heavy equipment or power tools".
400
Tool used to "steal" angles from other projects and transfer to another piece of wood.
What is the T- bevel.
500
The short piece of wire used to connect two plugs together.
What is a pigtail.
500
Name of the three joints we use to connect plumbing joints.
What is coupler,T and angle
500
Name of the short piece of wood that usually is seen between the header and top plate or sill and sole plate.
What is cripple.
500
The part of a toll that you don't have to look at to see if it's in good working condition.
What is the power cord.
500
Tool we use to make larger holes for the screw heads.
What is the counter-sink.
M
e
n
u