SAFETY
HAND TOOLS
POWER TOOLS
CONSTRUCTION DRAWINGS
BASIC RIGGING/MATERIAL HANDLING
100
What is a safety harness or personal fall arrest system.
100
When something is plumb it is exactly _____.
What is vertical
100
Before servicing or changing the blade on a power saw, you must first
Make sure the saw is disconnected from its power source.
100
A qualified, licensed person who creates and designs drawings for a construction project.
What is an Architect
100
What is the proper way to lift materials.
Lift with your legs, knees bent, back straight and head up
200
The most common cause of death for equipment operators is
What is equipment rollover
200
The ____ is the cut or channel made by a saw or blade.
What is Kerf
200
What power saw is used to cut 0 to 45 degree angles.
What is a miter saw
200
A drawing that provides an aerial view of the layout of each room.
What is a floor plan
200
What type of slings are used to carry loads in high temperatures up to 500 degrees fahrenheit.
What is an alloy steel chain
300
The four leading causes of deaths in the construction industry include electrical incidents, struck-by incidents, caught in or between incidents and _____.
What is falls
300
Shaped like an L, the ______ is used to make sure wall studs and sole plates are at right angles to each other.
What is a carpenter's square
300
A ________ is used to open and close the chuck on a power drill.
What is chuck key
300
S3 symbol on an electrical plan means.
What is a three-way switch
300
The maximum load weight that a sling is designed to carry is its r______ c_______.
What is rated capacity
400
A formal procedure for taking equipment out of service and ensuring that it cannot be operated until an authorized person has removed the lock and or warning tag.
What is LOCKOUT/TAGOUT (LOTO)
400
What handsaw is used to make miter cuts?
What is a backsaw
400
Before using ___________ tools, operators must be trained and certified.
What is powder-actuated
400
Drawings that show the design of the project. Also known as architectual drawings.
What is an architectual plan
400
What type of cart should be used for transporting gas cylinders?
What is a cylinder cart
500
To reduce the risk of working being hurt or killed by falling materials, the maximum height-to-base ratio of a stack of materials should be
What is 4:1
500
What is the difference between a cold chisel and a wood chisel?
Cold chisels are used for hard materials such as stone or steel.
Wood chisels are used only exclusively for wood.
500
What tool is used for large scale demolition work, such as tearing down walls and breaking up concrete or pavement.
What is a pavement breaker
500
Drawings that show the location of the building on the site from an aerial view, including contours, trees, construction features and dimensions.
What is a Civil Plan
500
Also known as the Georgia Buggy, this motorized wheeled cart is used to carry concrete, sand and gravel.
What is a Concrete Mule