POWER TOOL 101
Before connecting any power tool to a power source, it is critical to _____.
what is
confirm the power switch is set to OFF
Before using a hammer drill or rotary hmmer to drill into concrete, it is important to _____.
what is
review silica exposure standards
Saws with fine blades that are excellent for delicate and intricate cutting are called _____.
what is
jigsaws
The grinder type BEST suited to sharpening worn edges on cutting tools is the _____.
what is
bench grinder
A low velocity fastening system used to drive steel pins or threaded studs into masonry and steel is a(n) _____.
what is
powder-actuated tool
When using power tools, NEVER engage the _____.
what is
trigger lock
A pneumatic drill is commonly used _____.
what is
when electricity is unavailable
The coarseness of a bandsaw's blade is rated in _____.
what is
Teeth per inch (TPI)
The adjustable tool rest on a bench grinder should be positioned _____.
what is
1/8 inch from the grinding wheel
Compared with powder-actuated nailers, electric and pneumatic nailers _____.
what is
do not require certification
Before replacing parts such as bits, blades, or discs on any tool, it is important to _____.
What is
disconnect the power source
Never use a circular saw that does NOT have an upper blade guard because the _____.
what is
exposed blade poses a danger
A power miter saw combines a miter box with a _____.
what is
Circular saw
When using a grinder, two of the most important pieces of PPE are _____.
what is
gloves and safety glasses
Before using a pneumatically powered nailer for the first time, it is important to _____.
what is
read the manufacturer's manual
The part of a drill that holds the drill bit in place is called the _____.
what is
chuck
The most important maintenance on a circular saw involves the
what is
lower blade guard
Crosscutting with a table saw involves cutting the wood _____.
what is
Crosscutting with a table saw involves cutting the wood _____.
A type of grinder accessory that can be used to provide a stable surface for flexible sanding discs or buffing pads to rest against is called a(n) _____.
what is
backing pad
Most craftworkers who use pneumatic nailers operate their compressors at _____.
what is
70 to 120 psi
When using an appropriate bit, variable speed drills can be used like a(n) _____.
what is
screwdriver
When using a circular saw, be sure to cut on the waste side of the cut mark to allow for the blade's _____.
what is
Kerf
An angle grinder is used to grind _____.
what is
hard, heavy materials
A compact tool that operates by moving attachments back and forth at very high speeds is the
what is
oscillating multi-tool
A Porta-Power® is an example of a(n) _____.
what is
hydraulic tool