Basic Safety
A sign containing black letters on a yellow background conveys _____.
What is caution?
Chain bridle slings can be used with up to _____ legs.
What is four?
What should be used to strike a wood chisel?
What is Mallet?
Which of the following tools is a pneumatic tool?
A.Nailer
B.Pipe bender
C.Saw
D.Sander
What is Nailer?
A civil plan is also called a(n) _____ plan.
What is Plot?
Which of the fatal four results in the most fatalities?
What is Falls?
Wire rope slings are made of steel wires formed and wrapped around a _____.
What is supporting core?
Which type of screwdriver is characterized by an hourglass-shaped tip?
What is Clutch-drive?
Before loading a bit in an electric drill, make sure _____.
What is the drill is unplugged?
A roof plan is likely to be found on a(n) _____ plan.
What is architectural?
Which of the following items is not a part of a personal fall arrest system?
A. Anchor point
B.Slip-resistant shoes
C. Lanyard
D. Body harness
What is Slip-resistant shoes?
Load control when using a single vertical hitch can be achieved using a _____.
What is tag line?
Which type of pliers is used for working in tight places?
What is Needle-nose?
The most important item of PPE that should be worn when using any drill is _____.
What is safety glasses?
The border is a clear area about ____inch(es) around the edge of the drawing.
What is 1/2?
How often should a competent person inspect a personal fall arrest system?
What is Monthly?
An eyebolt's main characteristic is its _____.
What is threaded shank?
All of the following wrenches are non-adjustable except _____
A.pipe
B.hex key
C.box-end
D.open-end
What is Pipe?
What type of saw is used to make curved cuts in plywood?
What is Saber?
On a drawing, a scale of 1′′= 5′ is given. A line on the drawing is 4′′ long. What actual dimension does this 4′′ line represent?
What is 20'?
If you are to access a roof from a straight ladder, the ladder should extend at least ____.
What is 3 feet above the edge of the roof?
Unshouldered eyebolts are designed for _____.
What is vertical pulls?
How many gripping points do most sockets have?
What is 6 or 12?
On a job site, a portable bandsaw is almost exclusively used for cutting _____ .
What is heavy metal?
On a drawing, a scale of 12′′= 1′ is given. A line on the drawing is 3′′ long. What actual dimension does this 3′′ line represent?
What is 6'?