It is the actual path over which an electrical signal travels as it moves from one component to another.
It is a cable used in the transmission of video, communications, and audio.
COAXIAL CABLE
A type of configuration that enables users to connect similar devices such as desktop to anther desktop.
CROSSOVER CABLE
The “RJ” in RJ45 stands for?
REGISTERED JACK
It is a type of cabling that is used for telephone communications and most modern Ethernet networks.
TWISTED PAIR CABLE
It is cable that contains optical fibers (usually glass) coated in plastic that are used to send data by pulses of light.
FIBER OPTIC CABLE
TRUE OR FALSE
No more than 1/2" of the Ethernet cable should be untwisted otherwise it will be susceptible to crosstalk.
TRUE
It uses radio frequencies (RF) or infrared (IR) waves to transmit data between devices on a LAN.
WIRELESS COMMUNICATION
It is used to connect two Ethernet devices without a hub or for connecting two hubs/switches.
CROSSOVER CABLE
It is designed to remove insulation or outer sheath of a cable.
WIRE STRIPPER
It is used as a patch cord in Ethernet connections.
Looking at the RJ-45 with the clip facing away from you, _________________________ is always on the right.
BROWN
It is a surface mounted box used in a commercial and industrial building to cleanly attach network cables.
MODULAR BOX
It can send and receive information at the same time, so they can send information faster than hubs can.
SWITCH
Computer networking device that builds the connection with the other bridge networks which use the same protocol.
BRIDGE
These cables are also used in networks and what allow a broadband cable Internet connection using a cable modem.
COAXIAL CABLE
Provide wireless access to a wired Ethernet network.
ACCESS POINT (AP) OR WIRELESS ACCESS POINT (WAP)
Draw a Bus Topology

Enable computers to communicate and they can pass information between two networks—such as between your home network and the Internet.
ROUTER
Assists users in the installation and control of networks. It is normally used by technical service professionals and network administrators.
LAN TESTER
White Orange – Orange – White Green – Blue – White Blue – Green – White Brown - Brown
What is straight-through cable?
A type of configuration that enables users to connect two dissimilar devices such as, desktop to switches.
Draw T568B with proper alignment of colors from left to right

Use to connect computer to computer.
In chronological order, what is the step by step procedure in creating a straight-through cable?
1. Strip the cables Jacket back one full inch.
2. Untwist wire ends
3. Arrange the wires in the order in which you want to crimp them, (T568A, T568B, etc.).
4. While holding the wires firmly, cut off the wires 1/2" from the cables jacket
5. Insert the wires into the connector, making sure the wires stay lined up.
6. Check the wires
7. Crimp the cable
8. Test if the cable is working